Fire stopping in Kilchoan
Sealant work in Kilchoan for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire stopping installed outside its tested range
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Kilchoan
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Kilchoan
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve fire-stopping items raised at inspection or handover and openings found when ceilings come down for a refit, across linear gaps at wall heads, cable penetrations and pipe penetrations. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Kilchoan it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Kilchoan, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job we finish is backed by a 12-month workmanship guarantee, in Kilchoan as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Kilchoan (PH36)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Compartments and services around Kilchoan
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
For a building such as Ardnamurchan Parish Church of Scotland, new heating or data runs are the usual reason penetrations need sealing. In a hotel such as Kilchoan House Hotel, less than half a mile to the north-west of Kilchoan, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Kilchoan is in Highland. We cover Kilchoan and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 256 places in Highland, large and small.
Anyone looking for fire stopping in PH36 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Kilchoan, we cover Tobermory (5 miles south), Baliscate (6 miles south), Acharacle (12 miles east), Ballygown (13 miles south) and Salen (14 miles south-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Kilchoan
Well-known places in the area include Mingary Castle (0.6 miles east). Green spaces nearby include Loch Mudle.
How the quote is worked out
What shapes the price:
- Joint width, depth and condition
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Details that help us quote
However big the job, the same details help:
- Any dates the work must fit around
- The asbestos register, for older buildings
- A wide shot and a close-up of the area
- The type of building and who uses it
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call 01277 525 020 or email a schedule or drawings.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Where we can, we combine work around Kilchoan with other jobs nearby. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
- Tell staff and tenants when we will be in
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Related advice
More services for Kilchoan
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Check risers and ceiling voids after each round of works
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Keep general-purpose fillers away from compartment walls
- Record which product was used where
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
Building owners, agents and FMs in Kilchoan
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
What happens if it’s left?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Kilchoan, a repair visit takes planning, so it’s better to act early.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why choose Mastic Doctor in Kilchoan
- Our applicators hold CSCS cards
- Fully insured
- Joints cleaned back to sound surfaces
- Health and safety: CHAS accredited
Read our cost guide or our accreditations.
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- Gaps in walls that were never built as compartment walls
- Plastic pipes whose detail calls for a collar or wrap
- Writing the fire-stopping specification
If in doubt, call the office on 01277 525 020 or email drawings and photos and we’ll say what we think.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
Common questions from Kilchoan clients
Is Kilchoan off your patch?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you decide the fire-stopping details for buildings in Kilchoan?
No. The designer or fire engineer sets the detail and building control accepts it. We install what’s specified, to the product’s tested detail.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email us. Include photos or drawings if you have them.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.