Fire-rated sealing and fire stopping in Ruscote, Oxfordshire
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Ruscote and the surrounding area. Send photographs or drawings for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Openings left by services added after handover
- Open linear gaps along the top of fire-resisting walls
Fire stopping in Ruscote
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Honest limits
Before quoting, we check that sealant is the right answer. It won’t put right:
- Gaps in walls that were never built as compartment walls
- Reviewing a building’s overall fire safety
- Deciding what a wall or floor needs, which belongs to the designer
Not sure which it is? You can call 01277 525 020 or email us and we’ll tell you honestly before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers
Fire stopping in Ruscote, done properly
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you’re dealing with service penetrations left open after M&E works and old intumescent sealant that has split away, we can put it right. Most enquiries from Ruscote start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
In places the size of Ruscote, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or send photos by email and we’ll arrange a return visit.
- Where
- Ruscote (OX16, OX15)
- Region
- Oxfordshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Ruscote
Do you cover business parks and estates near Ruscote, such as Swan Industrial Estate?
Yes. We cover Ruscote and the area around it, including industrial estates, business parks and retail parks such as Swan Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
What does the BS 476 change mean for fire-rated sealant in Ruscote?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How much does the work cost?
Each job is quoted on its own details. For yours, call 01277 525 020 or email us.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months on every job.
Do you work in Ruscote?
Yes. Ruscote is in our area and the rest of Oxfordshire. To discuss a job, phone 01277 525 020 or email us.
How do I request a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What we are called out for in Ruscote
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
Clients usually get in touch after noticing something like this:
- Non-fire-rated filler around services
- Unsealed openings around new pipes and cables
- Unsealed joints where partitions meet the slab
- Improvised or mixed-product fire seals
Where a unit on an estate such as Swan Industrial Estate, which lies east of Ruscote, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Comparing quotes
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- How they handle RAMS and site documents
- What the guarantee covers, and for how long
Different surfaces, different methods
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits.
Aftercare for building managers
After handover, these steps help:
- Leave fire sealant to cure fully before covering it
- Put resealing into every M&E and fit-out package
- Foam or ordinary sealant is never a fire-seal repair
- Treat an open penetration as a priority repair
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
What sets the cost
Quotes vary with the job. It mainly depends on:
- How much existing material needs removing
- Phasing around occupants
- Quantities, in metres or numbers
- Distance, for remote addresses
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Rough lengths or quantities, or drawings if you have them
- Where the site is, with the postcode
- Access details, including height
- Whether the building will be occupied during the work
For a fixed quote, ring 01277 525 020 or email the details over. Our quote form is another easy route.
Where services cross fire walls in Ruscote
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Ruscote has a good number of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
Theatres, wards and plant rooms at sites like The Horton General Hospital (1.2 miles east of Ruscote) all have compartment walls crossed by services. At a college such as Oxford and Cherwell Valley College, which lies east of Ruscote, checking penetration seals after summer M&E works is good practice.
Ruscote is about 1 mile west of Banbury, in Oxfordshire. Across the OX16 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Ruscote is one of 423 places we cover in Oxfordshire. Sites around Oxford have their own page, roughly 22 miles from Ruscote.
We take on service penetrations across the OX16 and OX15 postcode area, for business premises of every kind. Among the streets we cover are Abbey Road, Lunnun Road and Bailey Road. Nearby places we also cover include Neithrop (1 mile north), Banbury (1 mile east), Drayton (1 mile north-west), North Newington (1 mile west) and Broughton (2 miles south-west) for service penetrations. Nearby towns on our patch include Bicester (14 miles south-east), Bure Park (14 miles south-east), Chipping Norton (11 miles south-west), Woodstock (15 miles south), Bloxham (3 miles south) and Charlbury (14 miles south).
Near you in Ruscote
Locally, jobs take us to sites close to North Oxfordshire Academy, Admiral Holland pub and Drayton School, among other places. The nearest railway station is Banbury station, about 1.5 miles east. A little further out are W. O. Bentley Memorial Foundation (2.4 miles north-west) and Castle Quay Shopping Centre (1.2 miles east). Green spaces nearby include Farthinghoe Nature Reserve and Crouch Hill.
More services for Ruscote
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a site in Ruscote, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Flag any permit to work we will need
- Arrange parking or a loading space
- Share the asbestos register for older buildings
Ask for a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.