The Mastic Doctor team standing beside their branded vans outside an office building
Oxfordshire · England

Fire stopping in Bloxham

We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Bloxham and the surrounding area. Send photos or drawings for a fixed quote.

  • Seals disturbed by maintenance and left open
  • Snag lists that include open service penetrations
  • Fire sealant pulled out of the opening
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
London, the South East & Scotland
CHAS accredited
£5m public liability

Fire stopping near Bloxham

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

How the quote is worked out

There’s no standard rate for sealant work, since sites vary so much. What we take into account:

  • Location, for remote and island sites
  • Which sealant the job calls for
  • How accessible the joints are
  • The site’s rules and procedures

The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.

What to include in your enquiry

Whether it’s one area or a whole building, these details speed things up:

  • The site address and postcode
  • A wide shot and a close-up of the area
  • Whether an asbestos survey exists
  • What the building is and how it’s used

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.

How we handle fire stopping in Bloxham

For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, call 01277 525 020 or email a schedule or drawings with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and pipe penetrations, and what we are called in for most is fire seals cut back for extra cables and never reinstated and open linear gaps along the top of fire-resisting walls. Facilities teams, main contractors and managing agents in Bloxham tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

Fire-rated sealing in a place like Bloxham is usually a single building at a time. Send the specification, drawings or photos of the openings and we will quote to suit.

Every job we finish is backed by a 12-month workmanship guarantee, in Bloxham as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Bloxham (OX15)
Wider area
Oxfordshire
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Phone
01277 525 020
Updated
3 November 2026

Aftercare for building managers

A few simple habits keep the new joints working:

  • File the specified details where the next contractor can find them
  • Get seals inspected before ceilings and boxing close
  • Report damaged or disturbed seals as soon as they’re spotted
  • Put resealing into every M&E and fit-out package

Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t, so check the product data first.

Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.

Do you need fire stopping in Bloxham?

Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.

Look out for the following:

  • Damaged fire seals in risers and voids
  • Unsealed openings around new pipes and cables
  • Fire sealant pulled out of the opening
  • Improvised or mixed-product fire seals

Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal.

Comparing quotes

  • Their public liability cover
  • How they’ll work around occupants
  • Health and safety accreditation such as CHAS
  • How they handle RAMS and site documents

How to choose a sealant contractor

How the job changes by surface

Linear joints

Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.

Cables and cable bundles

New data and power cables are the most common breach we see. We reseal around them to the specified detail, and we tell you if the bundle exceeds what sealant covers.

Questions we are asked in Bloxham

Can you work around term dates at a campus such as Oxford and Cherwell Valley College?

Yes. Education sites usually want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.

Is Bloxham too far out for you?

No. Places such as Bloxham are covered as much as the big towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.

Do you certify or sign off fire stopping?

No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. Our part is fitting the specified product to its tested detail, and any records you need can be confirmed with the quote.

Is the BS 476 change in 2029 relevant to fire stopping?

From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, with transitional arrangements set by the Government. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.

Can you quote from photos?

Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.

Do you seal openings left by new services?

Yes. Send the schedule or marked-up drawings and the specified product details for a fixed quote. Work can run area by area behind the M&E trades keeping pace with the programme.

How do I request a quote?

You can use the quote form on this site; alternatively, phone 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.

Work for main contractors and building owners

Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.

We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Bloxham can sit alongside others in a wider programme across Oxfordshire.

Fire stopping around Bloxham: points for this area

In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Bloxham lies roughly 65 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product.

Large healthcare estates like The Horton General Hospital (2.9 miles north-east of Bloxham) change their services often, so penetration seals are worth checking after M&E work. Offices at parks like Vantage Business Park (to the north of Bloxham) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.

Bloxham is about 3 miles south of Banbury, in Oxfordshire. We send applicators to Bloxham for service penetrations. Our Oxfordshire coverage takes in 423 places. Sites around Oxford have their own page, roughly 19 miles from Bloxham.

Commercial sites across OX15 are covered. Streets here include High Street, Merrivale's Lane and Unicorn Street. We also cover Milton (1 mile east), Broughton (2 miles north), North Newington (3 miles north) and Bodicote (3 miles north-east) for service penetrations. Nearby towns on our patch include Banbury (3 miles north), Bicester (12 miles south-east), Kidlington (14 miles south), Bure Park (12 miles south-east), Chipping Norton (9 miles south-west) and Neithrop (3 miles north).

Local landmarks in Bloxham

Locally, jobs take us to sites close to The Warriner School and Hawk & Partridge pub and the streets around them. The nearest railway station is Banbury station, about 3.5 miles north-east of the centre. A little further out are Bloxham Village Museum (under half a mile south-west) and Horton General Hospital (2.9 miles north-east). The countryside around Bloxham includes Crouch Hill and Woodford Bottom and Lamb's Pool.

Map of Bloxham © OpenStreetMap contributors

From enquiry to sign-off

Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Work in places the size of Bloxham is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.

  1. We read the specification, drawings or penetration schedule you send.
  2. Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
  3. Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
  4. Mineral wool or other backing goes in wherever the detail asks.
  5. We apply the specified sealant to the depth and around the services as the detail shows.
  6. If an opening needs something other than sealant, we tell you instead of improvising.

Preparing the site

  • Let us know about inductions and permits
  • Agree which areas must stay open
  • Send any specification or drawings in advance

Getting a fixed quote

For a fixed quote, give us a call on 01277 525 020 or email us. You can also send details through our quote form.

Ask for a quote

Advice

Accreditations

Trusted. Accredited. Insured.