Oxfordshire · England
Commercial sealant contractors in OX16
Commercial sealant, construction mastic and joint sealing across OX16, covering Banbury, Neithrop and Grimsbury, with a fixed quote before we start.
Mastic and sealant across OX16
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in OX16
What we do in OX16
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Mastic sealing for building owners and managing agents
- Fire-rated sealing and fire stopping
- Expansion and movement joint sealing
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: call 01277 525 020 or send photos by email.
Districts next door
Elsewhere in Oxfordshire
All places in Oxfordshire
All areas
Our commercial sealant contractors service in OX16
We’ve applied sealant on commercial sites for over 20 years: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. Let us know which site documents you need and they’ll be confirmed with the quote. Site teams most often ask us about greasy, split joints in a kitchen or tea point and damp patches where an external joint has failed, across window and door perimeters, floor and threshold joints and movement joints in walls and floors.
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes anything from part of a day on a short run of joints to several weeks on a large phased package, and our waste is bagged and taken away as we go.
- Send details through our quote form, or ask for a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Work is phased around your occupiers where areas need to stay in use.
- Every failed bead is removed rather than covered.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
What affects the price in OX16
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Why choose Mastic Doctor
- Public liability insurance in place
- Failed material removed, not covered up
- Work carried out by CSCS-carded applicators
- A Constructionline member, so easy to vet
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email drawings and photos.
Around Banbury
In Banbury, that means premises near Saint Paul's, People's Park and St Mary's Church of England Primary School, among other places. You’ll also find English Language Training (0.5 miles south-east), Duke of Wellington pub (under half a mile north) and Banbury Academy (0.9 miles south). Banbury’s nearest station is Banbury station, roughly 0.8 miles east. Nearby you’ll also find Castle Quay Shopping Centre (0.5 miles east) and Banbury Castle (0.5 miles east). The countryside around Banbury includes Crouch Hill and Farthinghoe Nature Reserve.
Commercial premises across OX16
From Banbury, Neithrop and Grimsbury outwards, OX16 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact, with colours matched site to site where the brand needs it.
Around the motorway corridors of the South East, business parks and industrial estates are common, and OX16 is part of the area we cover.
Banbury: Premises within reach of Banbury station, 0.8 miles to the east of Banbury, often have busy frontages where joints are seen by everyone passing. Trade counters and showrooms on estates such as Swan Industrial Estate (to the south-east of Banbury) need neat joints where customers see them.
Aftercare for building managers
To get the most from the new sealant:
- Check the asbestos register before anyone disturbs old sealant in an older building
- Note dates and locations of sealant work for future planning
- Don’t let cleaning or traffic back on before the cure time is up
- Report cracked or peeling sealant early
Our workmanship on each job is backed by a 12-month guarantee. Keep the handover details with your O&M or maintenance records.
An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Environmental health officers look at how cleanable surfaces are, which makes sound joints worth keeping on top of.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- Broken glass or blown double-glazed units
Signs you need commercial sealant contractors
The wrong sealant in the wrong place is a common cause of early failure. Painters’ acrylic in a moving joint, vinegar-smelling silicone on metal or natural stone, or a high-modulus product where a low-modulus one was needed. BS 6213 gives guidance on choosing construction sealants.
Common reasons buildings call us in:
- Frame mastic that has hardened and come away from the wall
- A top-up bead over failed sealant, now lifting
- External beads that have gone brittle and cracked
- Damp patches where an external joint has failed
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Quoting for work in OX16
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- The size and state of each joint
- The total length or number of joints
- Induction, permit and paperwork requirements
- The product specified
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- A wide shot and a close-up of the area
- What the building is and how it’s used
- The site address and postcode
- Any specification or named product
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Common questions from OX16 clients
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Do you check for asbestos before removing sealant?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and if something is suspected, work stops until it’s tested.
Which site documents can you send us?
We’ll confirm the paperwork you need, such as RAMS, an insurance certificate or CSCS details, with the quote. We hold CHAS accreditation and Constructionline membership and carry five million pounds of public liability insurance.
Is the old sealant taken out first?
Every scrap of failed sealant is removed before the new bead goes on. A bead laid on old silicone peels away and isn’t worth paying for.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure.
Can you handle sealant work across several sites?
Yes, we can. Send a list of addresses and what’s needed at each, and we will put together a fixed quote and a sensible order of work.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.