Rudgwick fire stopping
Planning work on a service penetration in Rudgwick? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Hidden openings found during inspections
- Unsealed openings around new pipes and cables
- Fire-stopping items raised at inspection or handover
Fire stopping across Rudgwick
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Aftercare for building managers
To get the most from the new sealant:
- Look above ceilings when tiles are lifted for other jobs
- File the specified details where the next contractor can find them
- Agree the fire-stopping specification before services go in
- Flag new cables with no seal around them
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
How we handle fire stopping in Rudgwick
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. If you have unsealed openings around new pipes and cables and fire sealant pulled out of the opening, we can help. One point of contact handles commercial sealant work in Rudgwick from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Smaller places such as Rudgwick still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Location
- Rudgwick (RH12)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Rudgwick: questions and answers
How does the move away from BS 476 affect penetration seals in Rudgwick?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Do you work on fire-rated sealing in hotels in Rudgwick?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Do you work in Rudgwick?
Yes. We cover Rudgwick. To discuss a job, call the office on 01277 525 020 or email us.
Places near Rudgwick
More services for Rudgwick
Diagnose, treat, sign off
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For work around Rudgwick, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Share the asbestos register for older buildings
- Send any specification or drawings in advance
- Tell us your opening times and when work is allowed
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, phone 01277 525 020 or send photos by email.
Advice
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Where services cross fire walls in Rudgwick
Rudgwick lies roughly 32 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls. For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Where a unit on an estate such as The Old Brickworks Industrial Estate, 0.5 miles to the north-west of Rudgwick, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. In a school such as Rudgwick Primary School, fire-rated sealant goes in around service penetrations where it is specified. For a hotel such as Goblin's Pool Hotel (0.5 miles south-west of Rudgwick), penetration seals are worth checking after any refit or services upgrade.
Rudgwick is about 6 miles west of Horsham, in West Sussex. Looking for fire stopping in Rudgwick? We can help. Rudgwick is one of 373 places we cover in West Sussex. Our Brighton page has more on work in that area, about 23 miles away.
If you need fire stopping in RH12, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Station Road, Thurne Way and Jubilee Road. If your building is just outside Rudgwick, we cover Bucks Green (1 mile south-west), Tisman's Common (1 mile west), The Haven (2 miles south), Slinfold (2 miles south-east) and Five Oaks (3 miles south). Further afield, our area takes in Crawley (11 miles east), Horsham (6 miles east), Broadfield (10 miles east), Storrington (12 miles south), Billingshurst (5 miles south) and Bewbush (10 miles east).
What’s near Rudgwick
Around Rudgwick, our work takes us to commercial buildings near Pennthorpe School and The Queen's Head Public House and the streets around them. The nearest railway station is Christs Hospital station, roughly 4.6 miles south-east. Well-known places in the area include Horsham Hospital (5.6 miles east).
Why it’s worth doing now in Rudgwick
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme, so earlier action pays back. Older rural buildings around Rudgwick move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
A quote for service penetrations depends on quantities, condition and access. Call for a quote.
Why clients in Rudgwick choose us
- Constructionline member for supplier checks
- CHAS accredited
- Fully insured
- Old sealant cut out, never sealed over
See how commercial sealant jobs are priced and our accreditations and insurance.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
How the job changes by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range.