Riverside fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Riverside, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Riverside
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Riverside, done properly
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. We work on small duct penetrations where the tested detail allows, service gaps in risers and cable penetrations, and the failures we are asked to look at most are openings left by services added after handover and unsealed joints where partitions meet the slab. One point of contact handles commercial sealant work in Riverside from the first photos to the final walk-round, for single jobs and planned programmes alike.
Travel to smaller places like Riverside is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Riverside (FK8, FK9, FK7)
- Wider area
- Stirling
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Riverside: questions and answers
Can you work in a care home near Riverside with residents in?
Yes. We agree rooms and times with the manager and work a few areas at a time. Noise and disruption are kept to a minimum.
How do the Scottish rules apply to fire-rated sealing in Riverside?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
How do we ask for a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Do you guarantee your work?
Yes. Workmanship is guaranteed for 12 months.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
- Fire risk assessments, a job for a competent assessor
Not sure which it is? You can phone 01277 525 020 or use the quote form and we’ll tell you honestly.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
On site: what to expect
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. For a building near Riverside, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- For older buildings, check the asbestos register before work
- Point out any areas we must not close
- Move anything stored against the joints
Ask for a quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Related advice
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Why act early in Riverside
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Around smaller places like Riverside, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why us?
- Failed material removed, not covered up
- Public liability insurance in place
- Our applicators hold CSCS cards
- Workmanship guaranteed for 12 months
Read how commercial sealant jobs are priced and our accreditations and insurance.
Surface by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance.
Signs you need fire stopping in Riverside
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
If one of these sounds familiar, it’s time for a closer look:
- Unsealed joints where partitions meet the slab
- Openings found when ceilings come down for a refit
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
Residences at universities like University of Stirling, 1.5 miles north of Riverside, have compartment walls that must be resealed whenever services change.
Before you book anyone
- The named product and why it was chosen
- Do they follow the manufacturer’s priming guidance?
- What level of public liability insurance do they hold?
- Their plan for phasing and protecting the area
Compartment walls and floors in Riverside
Two care or nursing homes sit less than 2 miles from Riverside. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. There are plenty of hotels within about 2 miles of Riverside. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product.
For a unit at a centre such as Thistles Centre, which lies south of Riverside, penetration seals are worth checking after each shop fit. Where a unit on an estate such as Phoenix Industrial Estate, which lies south of Riverside, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Riverside is about 1 mile north-east of Stirling, in Stirling. Riverside sits inside our coverage and the rest of Stirling, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Stirling, 52 places are covered, including Riverside. We also cover Glasgow, some 23 miles away.
Commercial sites across FK8, FK9 and FK7 are covered. Buildings on Barn Road, Park Lane and Shore Road are within our area. Access to Riverside is via the A9, so getting applicators and materials to site is simple. Sites close to Riverside are covered too, including Cambuskenneth (1 mile east), Stirling (1 mile south-west), Raploch (1 mile north-west), Causewayhead (1 mile north-east) and Cornton (1 mile north-west). Bigger towns within reach include Dunblane (5 miles north), Callander (13 miles north-west), Bannockburn (3 miles south), Cowie (4 miles south-east), Plean (5 miles south-east) and Fallin (3 miles south-east). As one of the bigger centres in Stirling, Riverside has a broad mix of commercial, public and industrial buildings, and we cover them all.
Around Riverside
We work on buildings around Royal Gardens and Red Lion Inn and the streets around them. Riverside has its own railway station: Stirling station. Well-known places in the area include Stirling Smith Museum and Art Gallery (0.7 miles south-west) and Stirling Health and Care Centre (1.3 miles south). Green spaces nearby include Airthrey Loch and Mote Hill.