Fire Stopping in Quidhampton
Work needed on a service penetration in Quidhampton? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Head-of-wall gaps with no fire seal
- Improvised or mixed-product fire seals
Need fire stopping in Quidhampton?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Quidhampton
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you have expanding foam used as fire stopping and openings found when ceilings come down for a refit, we can help. A specialist sealant contractor works differently from a general builder: on jobs in Quidhampton, preparation and product choice get the time they need.
Rural conversions around Quidhampton can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Quidhampton (RG25)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping in Quidhampton: the local picture
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. Quidhampton lies roughly 53 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls.
Holiday works at schools like Overton Church of England Primary School often leave service openings to seal before pupils return. Older community buildings such as Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Quidhampton is about 7 miles west of Basingstoke, in Hampshire. Anywhere in RG25, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 723 places in Hampshire, large and small. For work in that direction, see our Reading page (19 miles or so).
If you need fire stopping in RG25, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Elm Road, Copse Road and Station Road and the roads nearby. Sites close to Quidhampton are covered too, including Overton (1 mile south), Southington (1 mile south-west), Laverstoke (2 miles south-west), Freefolk (2 miles south-west) and Deane (2 miles east). A short drive away, we cover Basingstoke (7 miles east), Winchester (13 miles south), Andover (10 miles west), Alton (14 miles south-east), Tadley (9 miles north-east) and Hook (14 miles east).
What’s near Quidhampton
Locally, jobs take us to sites close to The White Hart Public House. There’s a railway station in Quidhampton itself: Overton station. The countryside around Quidhampton includes Ladle Hill.
Our process
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. For a building around Quidhampton, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Point out any areas we must not close
- Flag any permit to work we will need
- Have the specification and drawings to hand
Request a quote
For a fixed quote, call 01277 525 020 or use the quote form with the site address and an outline of the work. You can also send details through our quote form.
Related advice
Questions about Quidhampton
Will you design a fire-stopping scheme for our building in Quidhampton?
No. The designer or fire engineer sets the detail and building control accepts it. We install what’s specified, to the product’s tested detail.
How does the move away from BS 476 affect penetration seals in Quidhampton?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Building owners, agents and FMs in Quidhampton
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
What happens if it’s left?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Older rural buildings around Quidhampton move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why us?
- One contact handling all your sites
- Sealing commercial buildings since 2005
- Specification-led, product-correct work
- Joints cleaned back to sound surfaces
Different surfaces, different methods
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we will never swap a specified collar for sealant.
Also near Quidhampton
Also in Quidhampton
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Cost factors for service penetrations
These are the things that shape the price:
- Removal of failed or old sealant
- The site’s rules and procedures
- The total length or number of joints
- Whether the work must be split into stages
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What we need to price the job
For an accurate fixed quote, we need to understand the site. Send us:
- Whether the building will be occupied during the work
- Photos of the joints, close up and from further back
- Approximate linear metres or a joint schedule
- The product your specification calls for
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or send details through our quote form.