Fire stopping in Pyrford
Planning work on a service penetration in Pyrford? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Penetration schedules that need working through
- Expanding foam used as fire stopping
- Seals disturbed by maintenance and left open
Fire stopping for Pyrford sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Pyrford, done properly
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Pyrford. We work on service gaps in risers, linear gaps at wall heads and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are fire seals cut back for extra cables and never reinstated and openings found when ceilings come down for a refit. Facilities teams, main contractors and managing agents in Pyrford tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Converted and extended buildings around places like Pyrford can mix old and new construction, so it’s worth confirming the wall or floor type before choosing the seal. We match the product to the substrate and service, and say so if a collar, wrap or batt is the specified item.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Place
- Pyrford (GU22, KT14)
- Wider area
- Surrey
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Cost factors for service penetrations
To price the job, we consider:
- Removal of failed or old sealant
- The total length or number of joints
- Backing rod, priming and other preparation
- Any access equipment needed
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- What the building is and how it’s used
- Your programme or deadline
- Access details, including height
- The postcode of the building
To get a fixed quote, call 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
Our process
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Several jobs near Pyrford can be grouped on one trip. Tell us your site hours and we’ll plan around them.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us which areas need to stay in use
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
Nearby places to Pyrford
Other services in Pyrford
Signs you need fire stopping in Pyrford
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
These are often picked up first by site or facilities staff:
- Fire sealant pulled out of the opening
- Service penetrations left open after M&E works
- Head-of-wall gaps with no fire seal
- Damaged fire seals in risers and voids
For a school such as Pyrford Church of England Primary School, penetration sealing fits best at the end of the summer works.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- Proof of insurance
- How long is the guarantee, and what does it include?
- Do they follow the manufacturer’s priming guidance?
Penetration seals near Pyrford
There are four care or nursing homes within about 2 miles of Pyrford. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. We install fire-rated sealant to the tested detail where it is specified. Pyrford has a number of hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Theatres, wards and plant rooms at sites like Woking Community Hospital (2 miles south-west of Pyrford) all have compartment walls crossed by services. Tenant changes at parks like Kingsway Business Park (to the west of Pyrford) bring new data and services, and openings through fire-resisting walls need the specified seal.
Pyrford is about 3 miles east of Woking, in Surrey. We send applicators to Pyrford for service penetrations. 379 places across Surrey fall within our area, Pyrford among them. There’s a separate page for London, roughly 22 miles from Pyrford.
Work on service penetrations is covered throughout GU22 and KT14. Among the streets we cover are Pyrford Woods Close, Pyrford Woods Road and Onslow Way, and sites on any of them can send details for a fixed quote. Just outside Pyrford, we also work in Sheerwater (1 mile north-west), West Byfleet (1 mile north-east), Pyrford Village (1 mile south), Woodham (1 mile north) and Old Woking (2 miles south-west). Bigger towns within reach include Guildford (6 miles south-west), Woking (3 miles west), Camberley (9 miles west), Epsom (11 miles east), Farnham (15 miles south-west) and Ewell (11 miles east).
Around Pyrford
Around Pyrford, our work takes us to commercial buildings near The Bishop David Brown School, The Station pub and The Bishop David Brown School and the streets around them. The nearest railway station is West Byfleet station, roughly 1 mile north-east of the centre. Other landmarks nearby include Woking Community Hospital (2 miles south-west) and The Peacocks (2 miles west). Green spaces nearby include Papercourt Marshes and St Ann's Hill.
Questions we are asked in Pyrford
Do you work on fire-rated sealing in hotels in Pyrford?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Can work in a care setting near Pyrford go ahead while residents are there?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
What do you charge?
Each job is quoted on its own details. To get one, ring 01277 525 020 or email drawings and photos.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
How long does a typical visit take?
It depends on the scope, but the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
After the work
A few simple habits keep the new joints working:
- Record which product was used where
- Include service cupboards in routine inspections
- Arrange inspection before areas are covered up
- Make fire stopping part of every scope that crosses a fire-resisting wall
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small.