Fire-rated sealing and fire stopping in Pittulie, Aberdeenshire
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Pittulie and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Unsealed penetrations discovered above suspended ceilings
- Seals that don’t match their tested detail
- Fire seals cut back for extra cables and never reinstated
Fire stopping in Pittulie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Maintenance after handover
To get the most from the new sealant:
- Report damaged or disturbed seals as soon as they’re spotted
- File the specified details where the next contractor can find them
- Agree the fire-stopping specification before services go in
- Check with the data sheet before painting over fire sealant
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
How we handle fire stopping in Pittulie
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve openings left by services added after handover and damaged fire seals in risers and voids, on small duct penetrations where the tested detail allows, cable penetrations and pipe penetrations. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Pittulie, preparation and product choice get the time they need.
Refurbishments in small hotels, schools and care homes around places like Pittulie can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Pittulie (AB43)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Pittulie
More services for Pittulie
How the quote is worked out
These are the things that shape the price:
- Phasing around occupants
- Travel to remote or island sites
- The product specified
- Access and working height
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
For an accurate fixed quote, we need to understand the site. Send us:
- Specification clauses that apply
- Where the site is, with the postcode
- Access details, including height
- Asbestos survey details if the building is older
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Fire stopping around Pittulie: how the place shapes the job
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Holiday works at schools like Fraserburgh Academy often leave service openings to seal before pupils return. Hospital estates such as Fraserburgh Hospital, 2 miles east of Pittulie, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Pittulie is about 2 miles north-west of Fraserburgh, in Aberdeenshire. Looking for fire stopping in Pittulie? We can help. Our Aberdeenshire coverage takes in 179 places. Our Aberdeen page has more on work in that area.
If you need fire stopping in AB43, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Pittulie, we also work in Sandhaven (1 mile south-east), Rosehearty (2 miles west), Broadsea (2 miles east), Fraserburgh (2 miles south-east) and Memsie (3 miles south). Bigger towns within reach include Mintlaw (12 miles south), Longside (13 miles south), Strichen (8 miles south), Gardenstown (10 miles west), St Fergus (13 miles south-east) and Maud (12 miles south).
Landmarks near Pittulie
Other landmarks nearby include Pittulie Castle (1 mile west) and Fraserburgh Heritage Centre (2.3 miles east).
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits, and any outside it are raised with you.
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail. We confirm material and size first and tell you if sealant isn’t the right product.
Pittulie: questions and answers
Is Kessock Road Industrial Estate, near Pittulie, within your area?
Yes, sites like Kessock Road Industrial Estate are within our area, along with the rest of Pittulie. To start, just speak to us on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
How do the Scottish rules apply to fire-rated sealing in Pittulie?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can staff carry on working while you’re here?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Owners, agents and contractors
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Do you need fire stopping in Pittulie?
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Look out for the following:
- Improvised or mixed-product fire seals
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Unsealed joints where partitions meet the slab
Colleges such as North East Scotland College - Fraserburgh Campus (to the south-east of Pittulie) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Questions to ask before you book
- What site paperwork they can supply
- Will failed sealant be removed rather than covered?
- How long is the guarantee, and what does it include?
- Whether primer will be used where the manufacturer specifies it
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Pittulie, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Share the asbestos register for older buildings
- Tell staff and tenants when we’ll be in
- Let us know about inductions and permits
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or email us.