Fire stopping in Pitcairngreen
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Pitcairngreen and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
- Fire seals cut back for extra cables and never reinstated
Fire stopping across Pitcairngreen
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Why act early in Pitcairngreen
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Pitcairngreen before they leak.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Pitcairngreen
- Workmanship guaranteed for 12 months
- A Constructionline member, so easy to vet
- Fixed quotes based on photographs, drawings or a visit
- Fully insured
Read how commercial sealant jobs are priced and how we’re accredited.
About our fire stopping in Pitcairngreen
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance in Pitcairngreen and nearby. If you’re dealing with service penetrations left open after M&E works and expanding foam used as fire stopping, we can help. Whoever orders the work in Pitcairngreen, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Hotels and care homes around smaller places like Pitcairngreen often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- Pitcairngreen (PH1)
- Region
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Building owners, agents and FMs in Pitcairngreen
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Also near Pitcairngreen
What else we do in Pitcairngreen
Fire-rated sealing for Pitcairngreen buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. We install what’s specified, to the product’s tested detail.
In a hotel such as Leonardo Boutique Hotel Huntingtower Perth, 1.1 miles south-east of Pitcairngreen, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. For a building at a site such as Glenalmond Business Park, 1.6 miles to the west of Pitcairngreen, a check of penetration seals after each fit-out is good practice.
Pitcairngreen is about 3 miles north-west of Perth, in Perth and Kinross. Anywhere in PH1, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Pitcairngreen is one of 114 places in Perth and Kinross on our list for service penetrations. We also cover Dundee, some 21 miles away.
Business premises anywhere in PH1 are within our area. Streets here include Culloden House Court and Burnside Park, and sites on any of them can send details for a fixed quote. Close to Pitcairngreen, our area also takes in Almondbank (1 mile south), Ruthvenfield (2 miles south-east), Huntingtower (2 miles south-east), Tibbermore (2 miles south) and Tulloch (2 miles south-east). Bigger towns within reach include Perth (3 miles south-east), Blairgowrie and Rattray (13 miles north-east), Crieff (13 miles west), Auchterarder (12 miles south-west), Kinross (15 miles south) and Letham (3 miles south-east).
Landmarks near Pitcairngreen
The nearest railway station is Perth station, roughly 4 miles south-east. Well-known places in the area include Murray Royal Hospital (4.4 miles south-east) and Methven Castle (1.5 miles south-west). Not far away are Dupplin Lake and Mailer Hill.
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Travel to smaller Scottish places like Pitcairngreen is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Make sure the joints can be reached
- Let building users know which areas are affected
Getting a fixed quote
For a fixed quote, ring 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.
Advice
Doing it in-house
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Do you need fire stopping in Pitcairngreen?
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Things that usually lead to an enquiry:
- Old intumescent sealant that has split away
- Openings found when ceilings come down for a refit
- Fire-stopping items raised at inspection or handover
- Service penetrations left open after M&E works
For a hospital such as Murray Royal Hospital, which lies south-east of Pitcairngreen, penetration sealing is usually phased ward by ward, with infection-control rules agreed first.
Before you book anyone
- The named product and why it was chosen
- How long is the guarantee, and what does it include?
- Whether primer will be used where the manufacturer specifies it
- Health and safety accreditation such as CHAS
Questions we are asked in Pitcairngreen
Is Glenalmond Business Park, near Pitcairngreen, within your area?
Yes, sites like Glenalmond Business Park are within our area, along with the rest of Pitcairngreen. Photos and a short description are enough for a first look.
Would you work within a site like Murray Royal Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
Can you fire stop behind the services contractors?
Yes. Share the penetration schedule and product details and a fixed quote follows. We can follow the services contractor floor by floor.
Is the BS 476 change in 2029 relevant to fire stopping?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes. After that, the European classification under BS EN 13501-2 is the route. Product selection stays with your designer.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs usually get a visit.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
What sets the cost
There’s no standard rate for sealant work, because every site is different. What we look at:
- The product specified
- How accessible the joints are
- The total length or number of joints
- Site requirements such as inductions and permits
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
What we need to price the job
For an accurate fixed quote, we need to understand the site. Send us:
- When you need the work done
- Photos of the joints, close up and from further back
- The postcode of the building
- Any specification or named product
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.