Fire Stopping in Old Heath
Looking for fire stopping in Old Heath? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed joints where partitions meet the slab
- Improvised or mixed-product fire seals
- Openings left by services added after handover
Fire stopping for Old Heath sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the job changes by surface
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on and we confirm each before sealing.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically.
Fire stopping in Old Heath, done properly
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal. Most enquiries involve hidden openings found during inspections and unsealed openings around new pipes and cables, on service gaps in risers, small duct penetrations where the tested detail allows and linear gaps at wall heads. For commercial sealant work in Old Heath, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around smaller places like Old Heath, many commercial buildings are conversions or extensions of older ones, so the wall or floor a service passes through isn’t always what the drawings assume. We match the product to the substrate and service, and say so if a collar, wrap or batt is the specified item.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Old Heath (CO2, CO1, CO4)
- Wider area
- Essex
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Old Heath
Other services in Old Heath
Site staff or a sealant specialist?
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Leave it or put it right?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- One number for every site we cover
- Commercial sealant work since 2005
- CHAS accredited
- Work to your specification and the manufacturer’s guidance
See our cost guide or our accreditations.
Common problems we fix in Old Heath
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Most enquiries start with something like this:
- Fire sealant pulled out of the opening
- Fire stopping installed outside its tested range
- Builders’ foam or ordinary silicone in compartment walls
- Fire seals cut back for extra cables and never reinstated
Workshops and IT rooms at colleges like The Sixth Form College Colchester (to the north-west of Old Heath) are re-serviced often, leaving penetrations to seal.
Questions to ask before you book
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
- Are they CHAS accredited or on Constructionline?
- The named product and why it was chosen
Your questions answered
Will you take on work at estates like Grange Way Business Park, close to Old Heath?
Yes. We cover Old Heath and the area around it, including industrial estates, business parks and retail parks such as Grange Way Business Park. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
How does the move away from BS 476 affect penetration seals in Old Heath?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can staff carry on working while you are here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Several jobs near Old Heath can be grouped on one trip. Tell us your site hours and we will plan around them.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Send any specification or drawings in advance
- Tell staff and tenants when we’ll be in
- Clear stock, furniture or equipment away from the joints
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Advice
Fire stopping around Old Heath: points for this area
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Old Heath is about 51 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product.
Office fit-outs on sites such as Grange Way Business Park, less than half a mile to the north-east of Old Heath, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. At a university such as University of Essex, 0.9 miles north-east of Old Heath, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Old Heath is about 1 mile south of Greenstead, in Essex. Looking for fire stopping in Old Heath? We can help, as we do across Essex. We work across 644 places in Essex, from busy centres to rural villages. For work in that direction, see our London page (51 miles or so).
We take on service penetrations across the CO2, CO1 and CO4 postcode area, whatever the building. If your site is on Wick Road, Haven Road and D'arcy Road or close by, we can quote for service penetrations. Nearby places we also cover include The Hythe (1 mile north), Berechurch (1 mile south-west), Rowhedge (1 mile south-east), Greenstead (1 mile north) and Wivenhoe Cross (2 miles east) for service penetrations. Bigger towns within reach include Clacton-on-Sea (11 miles south-east), Maldon (14 miles south-west), Witham (13 miles west), Harwich (15 miles east), Halstead (13 miles west) and Heybridge (13 miles south-west).
Around Old Heath
Recent enquiries here include premises near The Bell pub, Thomas Lord Audley School and Language College and Donyland Lodge and the streets around them. The nearest railway station is Hythe station, about 1 mile north. Other landmarks nearby include Essex County Hospital (1.9 miles north-west) and Grandad's Photography Museum (1.5 miles north-west). The countryside around Old Heath includes Cockaynes Wood.
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is any of the following:
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
- Reviewing a building’s overall fire safety
If you are not sure, just ring 01277 525 020 or email drawings and photos and we will give you a straight answer.
What we seal
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers