Fire-rated sealing and fire stopping in Newmill, Scottish Borders
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Newmill and the surrounding area. Send details for a fixed quote.
- Expanding foam used as fire stopping
- Hidden openings found during inspections
- Seals that don’t match their tested detail
Need fire stopping in Newmill?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Issuing fire ratings or certificates for seals
- Construction that lacks the fire resistance the seal relies on
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just call the office on 01277 525 020 or email the details over and we will give you a straight answer.
What we seal
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Joints between fire-resisting walls and floors
Fire stopping in Newmill
Facilities managers in Newmill often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on small duct penetrations where the tested detail allows, pipe penetrations and cable penetrations, and the usual reasons a site gets in touch are service penetrations left open after M&E works and expanding foam used as fire stopping. A single leaking joint is often how a building in Newmill first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Newmill is planned so every penetration is sealed on one trip. Send the specification and photos of the openings, with sizes if you have them.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Newmill (TD9)
- Region
- Scottish Borders
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Agree the fire-stopping specification before services go in
- Check risers and ceiling voids after each round of works
- Arrange inspection before areas are covered up
- Record which product was used where
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open, not months later.
When to call us in Newmill
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
What tends to prompt an enquiry:
- Non-fire-rated filler around services
- Service penetrations left open after M&E works
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
Theatres, wards and plant rooms at sites like Hawick Cottage Hospital and Lamp Standard (to the north-east of Newmill) all have compartment walls crossed by services.
What your quote should include
- Their plan for phasing and protecting the area
- Their pre-qualification and accreditations
- Proof of insurance
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Other services in Newmill
What affects the price in Newmill
Before we quote, we look at:
- Joint width, depth and condition
- Travel to remote or island sites
- Phasing around occupants
- Induction, permit and paperwork requirements
We don’t publish prices, since every building and every scope is different. Call for a quote.
Sending details for a quote
However big the job, these details speed things up:
- Access details, including height
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
- Any dates the work must fit around
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email us.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Jobs near Newmill are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Explain the parking and delivery arrangements
- Flag any permit to work we will need
- Tell us which areas need to stay in use
Quotes
To get a fixed quote, call 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.
Read more
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Compartments and services around Newmill
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
For buildings in and around Newmill, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Newmill is about 4 miles south-west of Hawick, in the Scottish Borders. Businesses, contractors and managing agents in Newmill use us for work on service penetrations. Newmill is one of 91 places in the Scottish Borders on our list. For work in that direction, see our Edinburgh page (41 miles or so).
Work on service penetrations is covered throughout TD9, for business premises of every kind. With the A7 nearby, Newmill is straightforward for us to reach. If your building is just outside Newmill, we cover Wilton Dean (4 miles north-east), Wilton (4 miles north-east), Hawick (4 miles north-east), Stirches (5 miles north-east) and Burnfoot (5 miles north-east). Bigger towns within reach include Selkirk (12 miles north), Jedburgh (14 miles north-east), Denholm (9 miles north-east), Copshaw Holm (14 miles south) and Newtown St Boswells (15 miles north-east).
What’s near Newmill
Other landmarks nearby include Branxholme Castle (1.2 miles north-east) and Hawick Cottage Hospital and Lamp Standard (3.8 miles north-east). Green spaces nearby include Branxholme Easter Loch.
FAQs: Newmill
Would you work within a site like Hawick Cottage Hospital and Lamp Standard?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Newmill off your patch?
No. Places such as Newmill are covered as much as the big towns. We cover the whole of Scotland. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Will you write the fire-stopping specification?
No, that isn’t our role. Once you have a specification, we can price and install the sealant elements of it and point out anything needing another product.
Do you work in Scotland as well as England?
Scotland sets its own building regulations, with Technical Handbooks, while England relies on Approved Document B. Either way, we install the specified sealant to its tested detail.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.