Fire Stopping in Na Gearrannan
Need fire stopping in Na Gearrannan? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Service penetrations left open after M&E works
- Unsealed joints where partitions meet the slab
- Penetration schedules that need working through
Fire stopping near Na Gearrannan
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Compartment walls and floors in Na Gearrannan
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Island jobs, Na Gearrannan among them, are planned around the ferry and the forecast. Photos of each opening and the specification mean the right products make the trip.
For any site around Na Gearrannan, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer. Buildings near Na Gearrannan get the fire-rated product that’s specified, installed to its tested detail.
Na Gearrannan (Gaelic: Garenin) is in Na h-Eileanan Siar. We send applicators to Na Gearrannan for service penetrations, handled exactly as we handle every other area. Across Na h-Eileanan Siar, 87 places are covered, Na Gearrannan among them.
Work on service penetrations is covered throughout HS2, for business premises of every kind. Just outside Na Gearrannan, we also work in Carloway (1 mile south-east), Shawbost (4 miles north-east), Breasclete (5 miles south), Bragar (6 miles north-east) and Barabhas (10 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Local landmarks in Na Gearrannan
A little further out are Gearannon Blackhouse Village (less than half a mile north-west). For a walk, there’s Loch Langavat.
Fire stopping in Na Gearrannan, done properly
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. Most enquiries involve hidden openings found during inspections and seals that don’t match their tested detail, on small duct penetrations where the tested detail allows, cable penetrations and linear gaps at wall heads. A single leaking joint is often how a building in Na Gearrannan first comes to us: we look at the rest while we’re there and tell you what we find.
Around smaller places such as Na Gearrannan, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Our workmanship is guaranteed for 12 months, in Na Gearrannan as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Na Gearrannan (HS2)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Keep the joints in good shape with a few simple steps:
- Flag new cables with no seal around them
- Check with the data sheet before painting over fire sealant
- Check risers and ceiling voids after each round of works
- Settle who seals which penetrations at the start of a project
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is one of these:
- Issuing fire ratings or certificates for seals
- Fire risk assessments, a job for a competent assessor
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, give us a call on 01277 525 020 or send photos by email and we’ll say what we think.
Surfaces we seal
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
Common questions from Na Gearrannan clients
Will you design a fire-stopping scheme for our building in Na Gearrannan?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do Scotland’s building standards affect fire-rated sealant in Na Gearrannan?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you work in Na Gearrannan?
Yes. We cover Na Gearrannan, and the simplest way to start is to call the office on 01277 525 020 or email a schedule or drawings.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How much does the work cost?
Every job gets its own fixed quote. For yours, call the office on 01277 525 020 or email drawings and photos.
Why deal with it now?
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small and avoids a much larger catch-up later. Renewing every failing joint on one visit is the sensible approach for a place like Na Gearrannan. Photos of each area help us quote the whole job.
The product called for affects the cost, and so does the preparation. Access, phasing and site requirements come into it too.
Why appoint us
- One number for every site we cover
- Commercial sealant work since 2005
- A fixed quote before work starts
- Work carried out by CSCS-carded applicators
See our cost guide or how we’re accredited.
How the job changes by surface
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on and we confirm each before sealing.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Also in Na Gearrannan
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. Jobs near Na Gearrannan are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- For older buildings, check the asbestos register before work
- Make sure the joints can be reached
- Flag any permit to work we’ll need
Getting a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or phone 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Related advice
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.