Barabhas fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Barabhas and the surrounding area. Send photos or drawings for a fixed quote.
- Expanding foam used as fire stopping
- Seals that don’t match their tested detail
- Seals disturbed by maintenance and left open
Fire stopping across Barabhas
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Barabhas
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve expanding foam used as fire stopping and fire seals cut back for extra cables and never reinstated, on service gaps in risers, cable penetrations and joints between fire-resisting walls and floors. Most enquiries from Barabhas start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places such as Barabhas, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Barabhas (HS2)
- Region
- Na h-Eileanan Siar
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Signs you need fire stopping in Barabhas
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Most enquiries start with something like this:
- Fire-rated sealant that has cracked or shrunk back
- Openings found when ceilings come down for a refit
- Open linear gaps along the top of fire-resisting walls
- Improvised or mixed-product fire seals
Older community buildings such as Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Before you book anyone
- The named product and why it was chosen
- Health and safety accreditation such as CHAS
- Can the work be phased to keep areas open?
- What the guarantee covers, and for how long
Why act early in Barabhas
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Around smaller places like Barabhas, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why us?
- Clear, fixed quotes
- One contact handling all your sites
- Sealing commercial buildings since 2005
- CHAS accredited
Read what affects the cost and our accreditations.
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Walls or floors that aren’t fire-resisting to begin with
- Issuing fire ratings or certificates for seals
- Writing the fire-stopping specification
If in doubt, speak to us on 01277 525 020 or send photos by email and we’ll say what we think.
Where we work in Barabhas
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Barabhas. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Questions we are asked in Barabhas
Can you work at a site such as Barvas Industrial Estate, by Barabhas?
Yes. Our area takes in Barabhas and its surroundings, with estates and business parks such as Barvas Industrial Estate included. A few photographs and the unit address let us price the work.
How do the Scottish rules apply to fire-rated sealing in Barabhas?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Can you quote from photographs?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How the quote is worked out
To price the job, we consider:
- Whether the work must be split into stages
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
- How accessible the joints are
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Before you send an enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- Approximate linear metres or a joint schedule
- Specification clauses that apply
- The asbestos register, for older buildings
- How the joints are reached, and at what height
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or email us to discuss it first.
What else we do in Barabhas
Fire stopping around Barabhas: what changes locally
Being on an island, Barabhas means planning around ferry times as well as the weather. We need the specification and a count of penetrations before we sail. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Where a unit on an estate such as Barvas Industrial Estate, which lies south-east of Barabhas, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Barabhas (Gaelic: Barvas) is in Na h-Eileanan Siar. We cover commercial sites throughout Barabhas. 87 places across Na h-Eileanan Siar fall within our area, Barabhas among them.
Postcode districts covered here: HS2. Streets here include Heatherhill, Sraid na Loch and Gleann Mor, and sites on any of them can send details for a fixed quote. Just outside Barabhas, we also work in West Side (1 mile south-east), Shader (4 miles north-east), Bragar (4 miles west), Borgh (5 miles north-east) and Shawbost (7 miles west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Barabhas
For a walk, there’s Loch Mòr Bharabhais and Roishal More.
Diagnose, treat, sign off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Barabhas are often grouped with others in the same area. Let us know if your dates have any give.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Confirm the product named in the specification
- Explain the parking and delivery arrangements
- Flag any permit to work we’ll need
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or send details through our quote form.