Fire-rated sealing and fire stopping in Meresborough, Medway
Fire-rated and intumescent sealing of service penetrations and linear gaps in Meresborough and across Medway. CHAS accredited and fully insured, with a 12-month guarantee.
- Expanding foam used as fire stopping
- Unsealed joints where partitions meet the slab
- Snag lists that include open service penetrations
Fire stopping for businesses in Meresborough
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Fire stopping in Meresborough
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on sites in Meresborough. We work on linear gaps at wall heads, service gaps in risers and cable penetrations, and the failures we are asked to look at most are unsealed joints where partitions meet the slab and unsealed openings around new pipes and cables. For commercial sealant work in Meresborough, you deal with one contact from quote to sign-off, whether it’s one building or several.
Barn and farm-building conversions near places like Meresborough often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- Meresborough (ME8)
- Wider area
- Medway
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Include service cupboards in routine inspections
- Leave fire sealant to cure fully before covering it
- Agree the fire-stopping specification before services go in
- Report damaged or disturbed seals as soon as they’re spotted
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Your questions answered
Can you work at a site such as Parkwood Shopping Centre, by Meresborough?
Yes. Estates, retail parks and business parks around Meresborough, Parkwood Shopping Centre among them, are all within reach. Photos and a short description are enough for a first look.
Do you take on work at healthcare sites like Medway Maritime Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Do you work in Meresborough?
Yes. Meresborough falls within our area, and the simplest way to start is to call 01277 525 020 or email a schedule or drawings.
Is your workmanship covered by a guarantee?
Yes. Workmanship is guaranteed for 12 months.
Do you approve fire stopping for building control?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. Our part is fitting the specified product to its tested detail, and any records you need can be confirmed with the quote.
What affects the price in Meresborough
A fixed quote reflects the actual work. It takes account of:
- Location, for remote and island sites
- How much there is to seal
- Any access equipment needed
- Phasing around occupants
Pricing service penetrations depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
Details that help us quote
For an accurate fixed quote, we need to understand the site. Send us:
- Any dates the work must fit around
- Photos of the joints, close up and from further back
- What the building is and how it’s used
- The postcode of the building
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Towns and villages near Meresborough
More services for Meresborough
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Plastic pipes whose detail calls for a collar or wrap
- Fire risk assessments, a job for a competent assessor
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
On site: what to expect
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For work around Meresborough, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Point out any areas we must not close
- Arrange parking or a loading space
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or email us.
Related advice
Why act early in Meresborough
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. One visit to deal with every failing joint makes more sense than several trips to a place like Meresborough. Send photos of each area and we’ll quote for the lot.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why clients in Meresborough choose us
- Over 20 years of commercial sealing
- Specification-led, product-correct work
- One number for every site we cover
- Health and safety: CHAS accredited
Read how commercial sealant jobs are priced or our accreditations.
Penetration seals near Meresborough
Meresborough is about 32 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a hotel such as The Green Lion Hotel, 1 mile north of Meresborough, penetration seals are worth checking after any refit or services upgrade. At a healthcare site like Medway Maritime Hospital (3.7 miles north-west of Meresborough), new services through compartment walls are a constant, and each needs the specified seal. Residences at universities like University of Greenwich - Medway (to the north-west of Meresborough) have compartment walls that must be resealed whenever services change.
Meresborough is about 2 miles south-east of Gillingham, in Medway. Anywhere in ME8, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 54 places across Medway fall within our area, Meresborough among them. London is covered too, some 32 miles away.
Business premises anywhere in ME8 are within our area for service penetrations. Nearby places we also cover include Rainham (1 mile north), Moor Street (1 mile north-east), Hartlip (1 mile east), Yelsted (1 mile south) and Lower Hartlip (1 mile east) for service penetrations. Nearby towns on our patch include Chatham (4 miles west), Rochester (6 miles north-west), Strood (7 miles north-west), Luton (4 miles north-west), Lordswood (3 miles west) and Hoo St Werburgh (6 miles north-west).
Around Meresborough
In Meresborough, that means premises near Howard School, Foxburrow Wood and Leigh Academy Rainham, among other places. Meresborough’s nearest station is Rainham (Kent) station, about 1.3 miles north of the centre. A little further out are Medway Maritime Hospital (3.7 miles north-west). Green spaces nearby include Detling Hill and Bishop Saltings.