Fire Stopping in Yelsted
Fire stopping for Yelsted, from a contractor working since 2005. Fully insured and CHAS accredited.
- Expanding foam used as fire stopping
- Seals disturbed by maintenance and left open
- Seals that don’t match their tested detail
Need fire stopping in Yelsted?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Your questions answered
Is Yelsted off your patch?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Will you take on work at estates like Parkwood Shopping Centre, close to Yelsted?
Yes. Our area takes in Yelsted and its surroundings, with estates and business parks such as Parkwood Shopping Centre included. Send details of the unit and the work through our quote form for a quick quote.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How long does a typical visit take?
It depends on the scope, but the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we will give you a timescale with the quote.
What changes on 2 September 2029?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes. The European route, BS EN 13501-2, then applies. Product selection stays with your designer.
About our fire stopping in Yelsted
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Most enquiries involve hidden openings found during inspections and fire-rated sealant that has cracked or shrunk back, on linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors. Whoever orders the work in Yelsted, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Rural conversions around Yelsted can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Yelsted (ME9)
- Region
- Kent
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Treat an open penetration as a priority repair
- Have penetrations checked while they can still be seen
- Check with the data sheet before painting over fire sealant
- Don’t let anyone top up a fire seal with the wrong product
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Towns and villages near Yelsted
More services for Yelsted
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Yelsted may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Flag any permit to work we’ll need
- Confirm the product named in the specification
- Clear stock, furniture or equipment away from the joints
Ask for a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or email the details over.
Read more
How the job changes by surface
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail.
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we will say if that applies.
Penetration seals near Yelsted
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Yelsted is about 33 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
For a school such as St Augustine of Canterbury Catholic Primary School, penetration sealing fits best at the end of the summer works. At a retail site such as Parkwood Shopping Centre, which lies north-west of Yelsted, walls between units may be fire-resisting, so services added in a refit need the specified seal.
Yelsted is about 3 miles south-east of Gillingham, in Kent. Anywhere in ME9, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Yelsted is one of 931 places we cover in Kent. Our London page has more on work in that area, about 33 miles away.
We cover the ME9 postcode districts. For a building on Yelsted Road and Yelsted Lane or nearby, we can quote for service penetrations. Nearby places we also cover include Stockbury (1 mile east), Meresborough (1 mile north), Hartlip (1 mile north-east), Lower Hartlip (2 miles north-east) and Rainham (2 miles north) for service penetrations. A short drive away, we cover Maidstone (6 miles south-west), Sittingbourne (5 miles east), Gravesend (12 miles north-west), Faversham (12 miles east), Northfleet (14 miles north-west) and Minster (10 miles north-east).
What’s near Yelsted
Around Yelsted, our work takes us to commercial buildings near Leigh Academy Rainham and Stockbury Hill Wood and the streets around them. The closest station to Yelsted is Rainham (Kent) station, roughly 2.5 miles north of the centre. Other landmarks nearby include KIMS hospital (4 miles south-west). Open spaces near Yelsted include Detling Hill.
When to call us in Yelsted
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
It’s worth sending us details if you spot any of the following:
- Seals disturbed by maintenance and left open
- Penetration schedules that need working through
- Hidden openings found during inspections
- Builders’ foam or ordinary silicone in compartment walls
At a healthcare site like KIMS hospital, 4 miles south-west of Yelsted, new services through compartment walls are a constant, and each needs the specified seal.
Comparing quotes
- How the existing material will be dealt with
- How joint depth will be controlled
- Whether primer will be used where the manufacturer specifies it
- What level of public liability insurance do they hold?
Building owners, agents and FMs in Yelsted
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
What sets the cost
What shapes the price:
- Phasing around occupants
- The product specified
- Access and working height
- Backing rod, priming and other preparation
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Access details, including height
- Any dates the work must fit around
- The product your specification calls for
- Whether an asbestos survey exists
To get a fixed quote, give us a call on 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.