Menteith fire stopping
Work needed on a service penetration in Menteith? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping across Menteith
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Where we can, we combine work around Menteith with other jobs nearby. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Arrange parking or a loading space
- Warn occupants and staff about the work
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or send photos by email if you’d rather talk the job through.
Advice
Fire stopping in Menteith, done properly
We should be clear about what we do and don’t do. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Menteith. The enquiries we see most involve fire-stopping items raised at inspection or handover and fire seals cut back for extra cables and never reinstated, across joints between fire-resisting walls and floors, cable penetrations and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Menteith is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Hotels and care homes around smaller places like Menteith often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Place
- Menteith (FK9, FK16)
- Region
- Stirling
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Why it’s worth doing now in Menteith
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why appoint us
- Old sealant cut out, never sealed over
- Commercial sealant work since 2005
- One contact handling all your sites
- Public liability insurance in place
Compartments and services around Menteith
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Hotels such as Highland Hotel (to the north of Menteith) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Menteith is about 4 miles west of Dunblane, in Stirling. Businesses, contractors and managing agents in Menteith use us for work on service penetrations, as part of our coverage of Stirling. We work across 52 places in Stirling, large and small. Our Glasgow page has more on work in that area, about 24 miles away.
If you need fire stopping in FK9 and FK16, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Blairdrummond (1 mile south), Doune (1 mile north), Deanston (1 mile north-west), Gargunnock (4 miles south) and Dunblane (4 miles east) for service penetrations. A short drive away, we cover Stirling (6 miles south-east), St. Ninians (7 miles south-east), Raploch (5 miles south-east), Cornton (5 miles south-east), Torbrex (6 miles south-east) and Bridge of Allan (5 miles east).
Local landmarks in Menteith
The nearest railway station is Dunblane station, about 3.6 miles east. Nearby you will also find Doune Motor Museum (3 miles north-west) and Doune Castle (0.7 miles north). For a walk, there’s Hill of Row and Loch Mahaick.
Towns and villages near Menteith
Also in Menteith
FAQs: Menteith
Which Scottish guidance covers penetration seals in Menteith?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you design the fire stopping for buildings in Menteith?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Do you cover Menteith?
Yes. Menteith is in our area and the rest of Stirling. For a quote, give us a call on 01277 525 020 or use the quote form.
How do I request a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or use the quote form. Include photographs or drawings if you have them.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Can you quote from photographs?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Honest limits
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Plastic pipes whose detail calls for a collar or wrap
- Construction that lacks the fire resistance the seal relies on
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
What we seal
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
Maintenance after handover
To get the most from the new sealant:
- Get seals inspected before ceilings and boxing close
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
- Put resealing into every M&E and fit-out package
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job compared with dozens found at once.
Commercial clients in Menteith
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Menteith can form part of a wider programme.
What we are called out for in Menteith
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
Look out for the following:
- Snag lists that include open service penetrations
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
- Seals that don’t match their tested detail
Older community buildings such as Kincardine Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
What to look for in a quote
- Whether old or failed sealant will be cut out, not overlaid
- Their plan for phasing and protecting the area
- Who will actually carry out the work
- What site paperwork they can supply