Fire Stopping in Lydd-on-Sea
Looking for fire stopping in Lydd-on-Sea? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Seals that don’t match their tested detail
- Seals disturbed by maintenance and left open
- Openings left by services added after handover
Fire stopping in Lydd-on-Sea
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Record which product was used where
- Don’t let anyone top up a fire seal with the wrong product
- Get seals inspected before ceilings and boxing close
- Brief every trade that openings they make must be sealed
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Fire stopping in Lydd-on-Sea, done properly
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. Most enquiries involve builders’ foam or ordinary silicone in compartment walls and improvised or mixed-product fire seals, across small duct penetrations where the tested detail allows, service gaps in risers and cable penetrations. A specialist sealant contractor works differently from a general builder: in Lydd-on-Sea, that means joint design, primers and backing rod as standard.
For a smaller site near Lydd-on-Sea, we plan to do all the penetrations in one go, so send the specification and photos first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Lydd-on-Sea (TN29, TN28)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Signs you need fire stopping in Lydd-on-Sea
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
It’s worth sending us details if you spot any of the following:
- Seals disturbed by maintenance and left open
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
For a building such as St Peter's, new heating or data runs are the usual reason penetrations need sealing.
What your quote should include
- Whether old or failed sealant will be cut out, not overlaid
- Whether primer will be used where the manufacturer specifies it
- Will RAMS and insurance details be available?
- What level of public liability insurance do they hold?
Our process
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For a building around Lydd-on-Sea, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
- Share the asbestos register for older buildings
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or send photos by email.
Read more
Towns and villages near Lydd-on-Sea
What else we do in Lydd-on-Sea
Commercial clients in Lydd-on-Sea
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Leave it or put it right?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Older rural buildings around Lydd-on-Sea move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Why us?
- Workmanship guaranteed for 12 months
- CHAS accredited contractor
- One contact handling all your sites
- Fixed quotes based on photographs, drawings or a visit
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Fire-rated sealing for Lydd-on-Sea buildings
Lydd-on-Sea lies roughly 60 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
In a school such as Greatstone Primary School, fire-rated sealant goes in around service penetrations where it is specified. Industrial units on estates such as Peak Industrial Park (2.2 miles west of Lydd-on-Sea) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Lydd-on-Sea is about 10 miles south-west of Hythe, in Kent. Our applicators travel to Lydd-on-Sea for work on service penetrations. We work across 931 places in Kent. Our Brighton page has more on work in that area.
Business premises anywhere in TN29 and TN28 are within our area. For a building on Taylor Road, Lade Fort Crescent and Williamson Road or nearby, we can quote for service penetrations. Close to Lydd-on-Sea, our area also takes in Greatstone-on-Sea (2 miles north), Dungeness (2 miles south), Littlestone-on-Sea (2 miles north), Lydd (2 miles west) and New Romney (3 miles north). Nearby towns on our patch include Ashford (14 miles north), Folkestone (13 miles north-east), Hythe (10 miles north-east), Hawkinge (14 miles north-east), Tenterden (15 miles north-west) and Cheriton (12 miles north-east).
Around Lydd-on-Sea
A little further out are Romney 'castle' (4.2 miles north-west) and Lydd Town Museum (2.5 miles west). Open spaces near Lydd-on-Sea include Dungeness National and Burnthouse Pen.
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Writing the fire-stopping specification
- Fire risk assessments, a job for a competent assessor
- Openings that need collars, wraps, batts or boards rather than sealant
If you’re not sure, just ring 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Surfaces we seal
- Cable penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
Your questions answered
What happens to BS 476 references for fire stopping in Lydd-on-Sea?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you work at a site such as Peak Industrial Park, by Lydd-on-Sea?
Yes. Estates, retail parks and business parks around Lydd-on-Sea, Peak Industrial Park among them, are all within reach. A few photos and the unit address let us price the work.
How many days will you need on site?
It depends on the scope, but the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
How do I request a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.