Fire stopping in Dungeness
Fire stopping in Dungeness, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Old intumescent sealant that has split away
- Expanding foam used as fire stopping
- Unsealed joints where partitions meet the slab
Fire stopping across Dungeness
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- File the specified details where the next contractor can find them
- Arrange inspection before areas are covered up
- Check with the data sheet before painting over fire sealant
- Ask the designer to confirm details early on refits
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Fire stopping in Dungeness
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind. We close the openings listed on your schedule, using the specified sealant and detail. Most enquiries involve openings found when ceilings come down for a refit and fire-stopping items raised at inspection or handover, across cable penetrations, pipe penetrations and service gaps in risers. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Dungeness is the same: the right product in a properly prepared joint.
A job near Dungeness is usually planned around one visit, with the specification and photographs sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Dungeness (TN29)
- Wider area
- Kent
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail, and we’ll never swap a specified collar for sealant.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness before sealing.
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. Smaller jobs around Dungeness can be grouped with others nearby. You will have a fixed quote before work starts.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Share the asbestos register for older buildings
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, ring 01277 525 020 or email drawings and photos.
Related advice
Questions about Dungeness
Is Dungeness too small for you to travel to?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Can you produce the fire-stopping design for a job in Dungeness?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Is colour matching possible?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Fire stopping in Dungeness: the local picture
For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Dungeness lies roughly 61 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls.
For any site around Dungeness, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer. Buildings near Dungeness get the fire-rated product that’s specified, installed to its tested detail.
Dungeness is about 11 miles south-west of Hythe, in Kent. Dungeness sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Dungeness. There’s a separate page for Brighton, about 49 miles away.
If you need fire stopping in TN29, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Dungeness Road and Reactoe One Road or close by, we can quote for service penetrations. Close to Dungeness, our area also takes in Lydd-on-Sea (2 miles north), Greatstone-on-Sea (4 miles north), Lydd (4 miles north-west), Littlestone-on-Sea (4 miles north) and New Romney (5 miles north). Bigger towns within reach include Folkestone (14 miles north-east), Hythe (11 miles north-east), Cheriton (14 miles north-east), South Willesborough (15 miles north), Dymchurch (8 miles north) and Willesborough (15 miles north).
Local landmarks in Dungeness
In Dungeness, that means premises near Britannia Inn and the streets around them. Other landmarks nearby include Lydd Town Museum (3.7 miles north-west). The countryside around Dungeness includes RSPB Dungeness and Burnthouse Pen.
Nearby places to Dungeness
Other services in Dungeness
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Removal of failed or old sealant
- Access and working height
- Phasing around occupants
- Location, for remote and island sites
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- Access details, including height
- Specification clauses that apply
- Photos of the joints, close up and from further back
- The site address and postcode
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or email us.
What happens if it’s left?
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these, and the other benefits follow. One visit to deal with every failing joint makes more sense than several trips to a place like Dungeness, rather than one at a time. Send photos of each area and we will quote for the lot.
A quote for service penetrations depends on quantities, condition and access, plus any specification you are working to. Call for a quote.
Why appoint us
- CSCS-carded applicators
- Constructionline member
- Health and safety: CHAS accredited
- Specification-led, product-correct work
Read how commercial sealant jobs are priced and how we’re accredited.