Fire-rated sealing and fire stopping in Littleton, Surrey
Fire-rated and intumescent sealing of service penetrations and linear gaps in Littleton and across Surrey. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Penetration schedules that need working through
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
Fire stopping for Littleton sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Littleton
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Most enquiries involve fire sealant pulled out of the opening and service penetrations left open after M&E works, on service gaps in risers, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Most enquiries from Littleton start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Rural conversions around Littleton can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Littleton (GU3)
- Wider area
- Surrey
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Open penetrations multiply: each new service adds to the list. Keeping on top of it after each round of works keeps the job small. Around Littleton, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we’ll quote for the lot.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- Commercial sealant work since 2005
- 12 months’ guarantee on every job
- A fixed quote before work starts
- Health and safety: CHAS accredited
See how commercial sealant jobs are priced and how we’re accredited.
Nearby places to Littleton
What else we do in Littleton
Fire stopping around Littleton: what changes locally
The area within 2 miles of Littleton holds several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Residences at universities like University of Surrey - Manor Park Campus (to the north of Littleton) have compartment walls that must be resealed whenever services change. For a building at a site such as Home Farm Business Park, less than half a mile south-west of Littleton, a check of penetration seals after each fit-out is good practice. Large healthcare estates like Farnham Road Hospital, 1.5 miles north-east of Littleton, change their services often, so penetration seals are worth checking after M&E work.
Littleton is about 1 mile north of Farncombe, in Surrey. We cover commercial sites throughout Littleton, whether it’s a single job or part of a planned programme. 379 places across Surrey fall within our area, Littleton among them. Sites around Reading have their own page, about 23 miles away.
Business premises anywhere in GU3 are within our area for service penetrations. Sites close to Littleton are covered too, including Binscombe (1 mile south-west), Onslow Village (1 mile north), Compton (1 mile west), Hurtmore (2 miles south-west) and Wood Street Village (3 miles north-west). Nearby towns on our patch include Woking (7 miles north), Camberley (10 miles north-west), Farnham (8 miles west), Egham (15 miles north), Walton-on-Thames (14 miles north-east) and Dorking (12 miles east).
Local landmarks in Littleton
Locally, jobs take us to sites close to Farncombe Wood, The Withies Inn and Broadwater School. For rail, the closest station is Farncombe station, roughly 1.3 miles south of the centre. A little further out are Surrey Police Museum (0.7 miles north-east) and Farnham Road Hospital (1.5 miles north-east). Not far away are Lower Lake and St Catherine's Hill.
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FAQs: Littleton
Do you seal service penetrations in hotels around Littleton?
Yes, to the specification and the product’s tested detail. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
Can you work at a site such as Home Farm Business Park, by Littleton?
Yes. We cover Littleton and the area around it, including industrial estates, business parks and retail parks such as Home Farm Business Park. Photos and a short description are enough for a first look.
How many days will you need on site?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. If others near Littleton need work, visits can be combined. A fixed quote is given before anything starts.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Warn occupants and staff about the work
- Share your working hours and any access restrictions
- Arrange parking or a loading space
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
What we can’t put right
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Large openings beyond what any sealant detail covers
- Writing the fire-stopping specification
- Issuing fire ratings or certificates for seals
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Treat an open penetration as a priority repair
- Ask which product is in place before decorating
- Arrange inspection before areas are covered up
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there.