Fire stopping in Shackleford
Looking for fire stopping in Shackleford? It’s simple: send details, get a quote, we seal, guaranteed.
- Improvised or mixed-product fire seals
- Penetration schedules that need working through
- Old intumescent sealant that has split away
Fire stopping in Shackleford
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
About our fire stopping in Shackleford
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal, not a rule of thumb. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations, and the usual reasons a site gets in touch are fire-stopping items raised at inspection or handover and unsealed openings around new pipes and cables. A single leaking joint is often how a building in Shackleford first comes to us: we look at the rest while we are there and tell you what we find.
A job near Shackleford is typically planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Our workmanship is guaranteed for 12 months, in Shackleford as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Shackleford (GU8)
- Region
- Surrey
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Shackleford
Can you work at a site such as Godalming Business Centre, by Shackleford?
Yes. Our area takes in Shackleford and its surroundings, with estates and business parks such as Godalming Business Centre included. A few photographs and the unit address let us price the work.
What happens to BS 476 references for fire stopping in Shackleford?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Can the building stay open while you work?
In the majority of cases, yes. Phased work can be planned so areas stay in use.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Joint width, depth and condition
- Working within restricted access windows
- Induction, permit and paperwork requirements
- Access and working height
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Details that help us quote
It doesn’t need to be a full survey. A few details are enough to get going:
- Access details, including height
- Whether the building will be occupied during the work
- The product your specification calls for
- Photos of the joints, close up and from further back
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or email the details over.
Why act early in Shackleford
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme. Halls, stores and units around places like Shackleford may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What you get with us
- CSCS-carded applicators
- Public liability insurance in place
- Over 20 years of commercial sealing
- A fixed quote before work starts
See how commercial sealant jobs are priced and our accreditations.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Get seals inspected before ceilings and boxing close
- Put resealing into every M&E and fit-out package
- Settle who seals which penetrations at the start of a project
- Foam or ordinary sealant is never a fire-seal repair
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.
Fire-rated sealing for Shackleford buildings
At about 32 miles from central London, Shackleford is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
At a college such as Godalming College, which lies south-east of Shackleford, checking penetration seals after summer M&E works is good practice. On a hospital site such as Milford Hospital (2.8 miles south-east of Shackleford), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. In a building such as Church of St Mary, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Shackleford is about 5 miles south-west of Guildford, in Surrey. Anywhere in GU8, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Surrey coverage takes in 379 places, large and small. Our Reading page has more on work in that area (22 miles or so).
Work on service penetrations is covered throughout GU8, whatever the building. We cover commercial and managed buildings on The Street, Lombard Street and Chalk Lane. If your building is just outside Shackleford, we cover Hurtmore (1 mile east), Puttenham (2 miles north), Compton (2 miles north-east), Wanborough (2 miles north) and Binscombe (2 miles east). A short drive away, we cover Guildford (5 miles north-east), Woking (9 miles north-east), Camberley (10 miles north), Farnham (6 miles west), Dorking (15 miles east) and Frimley (8 miles north).
Local landmarks in Shackleford
Locally, jobs take us to sites close to Middlebriars Wood and Prior's Field School. The closest station to Shackleford is Godalming station, roughly 2.2 miles south-east of the centre. Well-known places in the area include Guildford Castle (4.5 miles north-east) and Charterhouse School Museum (1.8 miles east). The countryside around Shackleford includes Farncombe Wood and Hog's Back.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Deciding what a wall or floor needs, which belongs to the designer
- Large openings beyond what any sealant detail covers
- Approving the work on behalf of building control
If in doubt, phone 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Pipe penetrations
How a job runs
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Jobs in and around smaller places like Shackleford are usually planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Make sure the joints can be reached
- Share the asbestos register for older buildings
- Share your working hours and any access restrictions
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.