Kinlochewe fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in Kinlochewe and across Highland. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Seals disturbed by maintenance and left open
- Openings left by services added after handover
Fire stopping in Kinlochewe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Kinlochewe
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. The enquiries we see most involve fire seals cut back for extra cables and never reinstated and expanding foam used as fire stopping, across service gaps in risers, pipe penetrations and cable penetrations. One point of contact handles commercial sealant work in Kinlochewe from the first photos to the final walk-round, whether it’s one building or several.
Refurbishments in small hotels, schools and care homes around places like Kinlochewe can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Kinlochewe (IV22)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What affects the price in Kinlochewe
A fixed quote reflects the actual work. It takes account of:
- Travel to remote or island sites
- The site’s rules and procedures
- Whether the work must be split into stages
- Access and working height
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Clear photos of the problem areas
- The product your specification calls for
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email to discuss it first.
Your questions answered
How do Scotland’s building standards affect fire-rated sealant in Kinlochewe?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is a smaller place like Kinlochewe outside your area?
No. Places such as Kinlochewe are covered as much as the big towns. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Surface by surface
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we’ll never swap a specified collar for sealant.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area and tell you about openings outside the list.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Places near Kinlochewe
Also in Kinlochewe
Why it’s worth doing now in Kinlochewe
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is normally a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Kinlochewe, a repair visit takes planning, so it’s better to act early.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why appoint us
- Constructionline member
- Commercial sealant work since 2005
- Clear, fixed quotes
- 12-month guarantee on workmanship
Take a look at our cost guide and our accreditations.
Compartment walls and floors in Kinlochewe
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Buildings near Kinlochewe get the fire-rated product that’s specified, installed to its tested detail. Hotels such as Kinlochewe Hotel (to the south-west of Kinlochewe) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Kinlochewe (Gaelic: Ceann Loch Iù) is in Highland. Anywhere in IV22, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Kinlochewe is one of 256 places in Highland on our list.
Business premises anywhere in IV22 are within our area for service penetrations. Nearby places we also cover include Torridon (9 miles south-west), Balnacra (10 miles south), Srath Carran (13 miles south), Achintee (14 miles south) and Shieldaig (14 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Kinlochewe
Not far away are Loch Clair.
On site: what to expect
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. For work around Kinlochewe, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Tell us which areas need to stay in use
- Point out parking and an unloading spot
- Warn occupants and staff about the work
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.