Kincardine fire stopping
Fire stopping for Kincardine, from a contractor working since 2005. Fully insured and CHAS accredited.
- Fire-stopping items raised at inspection or handover
- Fire-rated sealant that has cracked or shrunk back
- Open linear gaps along the top of fire-resisting walls
Fire stopping near Kincardine
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Kincardine, done properly
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. If you have fire stopping installed outside its tested range and fire-stopping items raised at inspection or handover, we can put it right, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Kincardine, preparation and product choice get the time they need.
For a building near Kincardine, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Kincardine (FK10)
- Wider area
- Fife
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building near Kincardine, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- For older buildings, check the asbestos register before work
- Tell us your opening times and when work is allowed
- Tell us which areas need to stay in use
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Read more
How the quote is worked out
To price the job, we consider:
- Phasing around occupants
- Location, for remote and island sites
- How much existing material needs removing
- Quantities, in metres or numbers
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Whether the building will be occupied during the work
- Access details, including height
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
For a fixed quote, give us a call on 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Service penetrations in Kincardine buildings
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail. There are several hotels within about 2 miles of Kincardine. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Workshops and IT rooms at colleges like Scottish Police College, 0.5 miles to the north of Kincardine, are re-serviced often, leaving penetrations to seal. For a hotel such as Powfoulis Manor Hotel, 1.4 miles to the south-west of Kincardine, penetration seals are worth checking after any refit or services upgrade.
Kincardine is about 4 miles north of Grangemouth, in Fife. We cover commercial sites throughout Kincardine, for single jobs and planned programmes alike. Our Fife coverage takes in 132 places, large and small. Edinburgh is covered too, around 22 miles from Kincardine.
Commercial sites across FK10 are covered for service penetrations. For a building on High Street, Station Road and Priory Square or nearby, we can quote for service penetrations. Sites close to Kincardine are covered too, including Airth (2 miles west), Dunmore (3 miles north-west), Skinflats (3 miles south-west), Glensburgh (4 miles south) and Carronshore (4 miles south-west). Bigger towns within reach include Dunfermline (11 miles east), Cowdenbeath (14 miles east), Dalgety Bay (14 miles east), Rosyth (11 miles east), Abbeyview (11 miles east) and Inverkeithing (13 miles east).
Near you in Kincardine
We work on buildings around Ye Olde House Inn, among other places. The closest station to Kincardine is Alloa station, roughly 4.4 miles north-west of the centre. Well-known places in the area include Old Tulliallan Castle (0.9 miles north) and Dunimarle Museum (3.1 miles east). Green spaces nearby include Black Devon Wetlands RSPB Reserve.
Common questions from Kincardine clients
What do Scotland’s building standards say about service penetrations in Kincardine?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you work in a care home near Kincardine with residents in?
Yes, with the manager deciding the order and timing of rooms. Noise and disruption are kept to a minimum.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
What do you charge?
We don’t publish prices, because every site is different. Send photographs or drawings and we will price it at a fixed figure.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Why it’s worth doing now in Kincardine
The longer openings stay, the more there tend to be: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small and avoids a much larger catch-up later. For buildings near Kincardine, dealing with all the failing joints at once saves return trips. Send photos and we’ll quote for everything together.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Why clients in Kincardine choose us
- A Constructionline member, so easy to vet
- Fully insured
- One phone line for London, the South East and Scotland
- Fixed quotes based on photographs, drawings or a visit
Take a look at our cost guide or our accreditations and insurance.
Surface by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance along with any permits your site needs.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Approving the work on behalf of building control
- Plastic pipes whose detail calls for a collar or wrap
- Deciding what a wall or floor needs, which belongs to the designer
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Where we work in Kincardine
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
Places near Kincardine
Also in Kincardine
When to call us in Kincardine
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Common reasons buildings call us in:
- Non-fire-rated filler around services
- Unsealed penetrations discovered above suspended ceilings
- Unsealed openings around new pipes and cables
- Unsealed joints where partitions meet the slab
For a building such as Church of Scotland, new heating or data runs are the usual reason penetrations need sealing.
What your quote should include
- Their approach to joint depth and backing
- Do they follow the manufacturer’s priming guidance?
- Which product they’ll use, and why it suits the joint
- What the guarantee covers, and for how long