Dunmore fire stopping
Work needed on a service penetration in Dunmore? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Non-fire-rated filler around services
- Improvised or mixed-product fire seals
- Open linear gaps along the top of fire-resisting walls
Fire stopping for Dunmore sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Compartments and services around Dunmore
The 2 miles around Dunmore include two care or nursing homes. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a building such as Airth Parish Church and Churchyard, new heating or data runs are the usual reason penetrations need sealing. For a site team at a college like Forth Valley College - Alloa Campus (2.2 miles north of Dunmore), fire-rated sealing is best scheduled after the summer works.
Dunmore is about 3 miles south of Alloa, in Falkirk. If you are looking for fire stopping in Dunmore, we can help, as we do across Falkirk. Dunmore is one of 53 places we cover in Falkirk for service penetrations. We also cover Edinburgh, some 24 miles away.
Commercial sites across FK2 are covered. Sites close to Dunmore are covered too, including Airth (1 mile south-east), Kincardine (3 miles south-east), Carronshore (4 miles south), Skinflats (4 miles south) and Carron (4 miles south). Further afield, our area takes in Falkirk (6 miles south), Grangemouth (6 miles south-east), Bo'ness (8 miles south-east), Larbert (4 miles south-west), Stenhousemuir (4 miles south) and Denny (7 miles south-west).
Around Dunmore
Dunmore’s nearest station is Alloa station, roughly 2.3 miles north. Well-known places in the area include Stirling District Lunatic Asylum (3.7 miles south-west) and Alloa Museum And Gallery (2.3 miles north). For a walk, there’s Black Devon Wetlands RSPB Reserve.
Fire stopping in Dunmore, done properly
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, speak to us on 01277 525 020 or email drawings and photos with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve fire-rated sealant that has cracked or shrunk back and unsealed penetrations discovered above suspended ceilings, on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and linear gaps at wall heads. For commercial sealant work in Dunmore, you deal with one contact from quote to sign-off, whether it’s one building or several.
Travel to smaller places like Dunmore is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Dunmore (FK2)
- Wider area
- Falkirk
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement.
Why act early in Dunmore
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down. For buildings near Dunmore, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
What you get with us
- One phone line for London, the South East and Scotland
- Fully insured
- CHAS accredited
- Work carried out by CSCS-carded applicators
Take a look at our cost guide and our accreditations and insurance.
Diagnose, treat, sign off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Tell us who will meet us and how to get in at your building near Dunmore. We’ll confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
- For older buildings, check the asbestos register before work
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or send details through our quote form.
Read more
Common questions from Dunmore clients
Is Dunmore too far out for you?
No. Places such as Dunmore are covered as much as the big towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you work in occupied care homes around Dunmore?
Yes. We agree rooms and times with the manager and work a few areas at a time. Any site rules, from signing in to infection control, are agreed before we start.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
How do we ask for a quote?
You can use the quote form on this site; alternatively, phone 01277 525 020 or send photos by email. Include photographs or drawings if you have them.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Towns and villages near Dunmore
More services for Dunmore
Site staff or a sealant specialist?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Ask the designer to confirm details early on refits
- Foam or ordinary sealant is never a fire-seal repair
- Brief every trade that openings they make must be sealed
- Include service cupboards in routine inspections
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Do you need fire stopping in Dunmore?
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position.
It’s worth sending us details if you spot any of the following:
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
- Unsealed openings around new pipes and cables
- Fire-rated sealant that has cracked or shrunk back
At a healthcare site like Stirling District Lunatic Asylum, which lies south-west of Dunmore, new services through compartment walls are a constant, and each needs the specified seal.
Before you book anyone
- What site paperwork they can supply
- Their public liability cover
- Are they CHAS accredited or on Constructionline?
- Whether their applicators hold CSCS cards