Hunter's Town expansion joint sealing
Work needed on a movement joint in Hunter's Town? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Layers of sealant in a movement joint
- Chipped joint edges on forklift routes
- Damp inside where a wall movement joint has failed
Expansion joint sealing for businesses in Hunter's Town
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Hunter's Town, done properly
For movement joints in Hunter's Town, photographs and approximate lengths are the best start. We will come and look where photographs don’t show enough, then send a fixed quote that names the sealant. You can also phone 01277 525 020 or email us to talk the joints through. Site teams most often ask us about expansion joints split through the centre of the bead and sealant peeling off one face of the joint, across blockwork control joints, podiums and floor movement joints and car park decks and ramps. A specialist sealant contractor works differently from a general builder: on jobs in Hunter's Town, preparation and product choice get the time they need.
In smaller places such as Hunter's Town, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Hunter's Town (DD7)
- Wider area
- Angus
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Damaged metal nosings or cover plates over a joint
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Changing the joint layout or spacing of a structure
Not sure which it is? You can speak to us on 01277 525 020 or email the details over and we will tell you honestly before you book.
Surfaces we seal
- Car park decks and ramps
- Cladding panel joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Brickwork movement joints
- Blockwork control joints
Places near Hunter's Town
Other services in Hunter's Town
Where floor joints take the most wear near Hunter's Town
The sea is no more than about 1 mile from Hunter's Town. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Hunter's Town is on Scotland’s drier eastern side. Frost and de-icing salt still find their way into open external joints. Sealing them in drier months limits winter damage.
Schools such as Carnoustie High School have movement joints in their walls and floors that are easy to overlook.
Hunter's Town is about 1 mile west of Carnoustie, in Angus. We cover commercial sites throughout Hunter's Town, whether it’s a single job or part of a planned programme. Our Angus coverage takes in 65 places, from busy centres to rural villages. Dundee is covered too, some 10 miles away.
We take on movement joints across the DD7 postcode area, for business premises of every kind. For a building on Barry Road, Lochend Road and Maclagan Road or nearby, we can quote for movement joints. You’ll find Hunter's Town on or near the A930. Nearby places we also cover include Gardynebourg (1 mile south-west), Carnoustie (1 mile east), Clayholes (1 mile north), Carlogie (1 mile north-east) and Barry (1 mile west). Nearby towns on our patch include Arbroath (7 miles north-east), Forfar (12 miles north-west), Monifieth (4 miles west), Letham (9 miles north), Friockheim (10 miles north) and Liff (13 miles west). Among the larger centres in Angus is Hunter's Town, and we take on movement joints for its commercial and public buildings.
What’s near Hunter's Town
Hunter's Town has its own railway station: Golf Street station. A little further out are Panmure Castle (2 miles north) and Ashludie Hospital (3.6 miles west).
Common questions from Hunter's Town clients
Is a smaller place like Hunter's Town outside your area?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Can being near the sea in Hunter's Town affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.
Can a joint be sealed if the edges are broken?
The edges have to be sound. Where they’ve broken up, we’ll tell you they need repairing first, so the new seal has something to grip.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
What sealant do you use in movement joints?
Whatever suits the joint and the specification. The quote states the sealant and its movement class, so you know what’s going in.
Can you work on car park ramps and decks?
Yes. These joints take wheels, salt and water, so product choice matters.
Cost factors for movement joints
A fixed quote reflects the actual work. It allows for:
- The total length or number of joints
- Induction, permit and paperwork requirements
- Which sealant the job calls for
- Any access equipment needed
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Any specification or named product
- When you need the work done
- What the building is and how it’s used
- How the joints are reached, and at what height
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
From enquiry to sign-off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. For a building near Hunter's Town, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Finished joints are checked and backed by our 12-month guarantee.
Preparing the site
- Tell us your opening times and when work is allowed
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Advice
What happens if it’s left?
Sealing over a failed movement joint is a common shortcut. A bead laid on top of the failed one neither grips nor flexes properly, so it fails quickly. We cut out the old seal and prepare the faces every time. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Hunter's Town, a repair visit takes planning, so it’s better to act early.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Why us?
- A fixed quote before work starts
- Work to your specification and the manufacturer’s guidance
- Constructionline member for supplier checks
- Fully insured
See how commercial sealant jobs are priced and how we’re accredited.
When to call us in Hunter's Town
Sealant peeling cleanly off one side is an adhesion failure. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes and it often shows on rushed work.
Site and facilities staff are often the first to spot these:
- Spalled or broken joint edges in floors and decks
- Water getting into the wall through a failed joint
- Expansion joints filled with dirt and stones
- Car park joints leaking onto vehicles below
Sites like Ashludie Hospital, 3.6 miles to the west of Hunter's Town, carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Comparing quotes
- What level of public liability insurance do they hold?
- How the existing material will be dealt with
- How they’ll work around occupants
- Health and safety accreditation such as CHAS
What the job involves on each surface
Car park decks and ramps
Failed deck joints often show as leaks on the level below. The old seal comes out, the edges are prepared and the joint resealed flagging broken edges along the way.
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix and flag it if the membrane looks like the source.