Expansion and movement joint sealing in Hillend, Angus
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Hillend. Send details for a fixed quote.
- Spalled or broken joint edges in floors and decks
- Previous reseals laid over old sealant
- Damp inside where a wall movement joint has failed
Expansion joint sealing across Hillend
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Why deal with it now?
Some quotes just add sealant over the old bead. A bead laid on top of the failed one neither grips nor flexes properly and soon lets go. We cut out the old seal and prepare the faces every time. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Why us?
- One number for every site we cover
- Colour options checked against the specified product
- Specification-led, product-correct work
- Health and safety: CHAS accredited
Take a look at what affects the cost and how we’re accredited.
About our expansion joint sealing in Hillend
Few joints take as much punishment as those in a car park. Tyres load the edges, and de-icing salts and water work into any gap, so failed seals soon lead to leaks onto the level below and broken edges. We reseal deck and ramp joints with a trafficable sealant chosen for the movement. If you’re dealing with chipped joint edges on forklift routes and hardened, cracked sealant on exposed facades, we can help, whatever the surface. For commercial sealant work in Hillend, you deal with one contact from quote to sign-off, whether it’s one building or several.
In smaller places such as Hillend, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Hillend (DD8)
- Wider area
- Angus
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Tell us who will meet us and how to get in at your building near Hillend. That goes into the plan alongside the quote.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Agree which areas must stay open
- Flag any permit to work we will need
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Related advice
More services for Hillend
Slabs, ramps and loading bays in Hillend
Hillend is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them. The 3 miles around Hillend take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For a centre such as Forfar Retail Park (2.5 miles north-west of Hillend), the service yard and car park joints normally need attention first. Hospital campuses such as Forfar Infirmary (2 miles north-west of Hillend) grow in stages, leaving movement joints wherever new blocks meet old. On a site such as Restenneth Business Park, 2.1 miles to the north-west of Hillend, the movement joints are in car park slabs, paving and building elevations.
Hillend is about 2 miles south-east of Forfar, in Angus. Across the DD8 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Angus coverage takes in 65 places, large and small. Dundee is covered too, around 12 miles from Hillend.
If you need expansion joint sealing in DD8, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Lownie Moor (1 mile west), Kingsmuir (1 mile north-west), Craichie (1 mile south-east), Lunanhead (2 miles north) and Forfar (2 miles north-west). Nearby towns on our patch include Arbroath (10 miles south-east), Montrose (15 miles north-east), Monifieth (10 miles south), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west) and Brechin (10 miles north-east).
Around Hillend
A little further out are Meffan Museum and Art Gallery (2.3 miles north-west) and Forfar Castle (2.4 miles north-west). The countryside around Hillend includes Loch Fithie.
When something else is needed
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Damaged metal nosings or cover plates over a joint
- Movement on a scale no sealant is meant to absorb
- Joints too narrow for the movement, which need redesigning by the engineer
Not sure which it is? You can give us a call on 01277 525 020 or email a schedule or drawings and we will tell you honestly.
Where we work in Hillend
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps
- Blockwork control joints
- Podiums and floor movement joints
- Brickwork movement joints
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
After the work
Once the work is signed off, a little attention goes a long way:
- Inspect movement joints alongside other routine building checks
- Record the sealant used and the date in the O&M file
- Keep traffic off new joints until the cure time is up
- Keep scrapers and ploughs from dragging across joint sealant
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it and it can affect the structure over time. Sealing the joint promptly stops it at source.
Common questions from Hillend clients
Would you work within a site like Forfar Infirmary?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Hillend off your patch?
Not at all. Hillend is within our area. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
What causes movement joint sealant to fail?
Adhesion failure, cohesive failure, edge breakdown and UV ageing account for most cases. We diagnose which one it is before resealing, because the fix differs.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure.
Do you use silicone or polyurethane in movement joints?
The right product depends on the joint. Low-modulus neutral-cure silicone suits many facade joints, while polyurethane is common in trafficked floor and deck joints, and the specification has the final say.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
What affects the price in Hillend
Quotes vary with the job. It mainly depends on:
- Which sealant the job calls for
- Location, for remote and island sites
- Joint width, depth and condition
- Removal of failed or old sealant
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we’ll explain how it’s made up.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Anything awkward about access or site hours
- Clear photographs of the problem areas
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.