Fire-rated sealing and fire stopping in Glenlomond, Perth and Kinross
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Glenlomond and the surrounding area. Send photographs or drawings for a fixed quote.
- Openings left by services added after handover
- Expanding foam used as fire stopping
- Snag lists that include open service penetrations
Fire stopping for Glenlomond sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Questions we’re asked in Glenlomond
What do Scotland’s building standards say about service penetrations in Glenlomond?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do you decide the fire-stopping details for buildings in Glenlomond?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Can the building stay open while you work?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you cover Glenlomond?
Yes. We take on work across Glenlomond, and the same phone number covers every area.
Fire stopping in Glenlomond
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. Site teams most often ask us about builders’ foam or ordinary silicone in compartment walls and fire-stopping items raised at inspection or handover, on joints between fire-resisting walls and floors, linear gaps at wall heads and service gaps in risers. Whoever orders the work in Glenlomond, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In smaller Scottish places like Glenlomond, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Glenlomond (KY13)
- Region
- Perth and Kinross
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. Tell us who will meet us and how to get in at your building near Glenlomond. That goes into the plan alongside the quote.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Move anything stored against the joints
- Explain the parking and delivery arrangements
- Flag any permit to work we will need
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Read more
Leave it or put it right?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Why clients in Glenlomond choose us
- One contact handling all your sites
- Workmanship guaranteed for 12 months
- Fully insured, including public liability cover
- CHAS accredited contractor
Take a look at what affects the cost or our accreditations.
Different surfaces, different methods
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance.
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork normally needs a different solution set by the designer, and we will say if that applies.
What sealant work can’t fix
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Construction that lacks the fire resistance the seal relies on
- Deciding what a wall or floor needs, which belongs to the designer
- Large openings beyond what any sealant detail covers
If in doubt, speak to us on 01277 525 020 or use the quote form and we’ll say what we think before you book.
Surfaces we seal
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
Common problems we fix in Glenlomond
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
Site and facilities staff are often the first to spot these:
- Openings left by services added after handover
- Seals that don’t match their tested detail
- Snag lists that include open service penetrations
- Builders’ foam or ordinary silicone in compartment walls
Halls and meeting rooms at places like Easter Balgedie church sometimes gain new services, and any compartment wall crossed needs the specified seal.
What to look for in a quote
- Their plan for phasing and protecting the area
- What site paperwork they can supply
- Do they follow the manufacturer’s priming guidance?
- Will failed sealant be removed rather than covered?
Nearby places to Glenlomond
What else we do in Glenlomond
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Fire stopping around Glenlomond: how the place shapes the job
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install what’s specified, to the product’s tested detail.
For buildings in and around Glenlomond, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Glenlomond is about 7 miles west of Glenrothes, in Perth and Kinross. We cover commercial sites throughout Glenlomond, for single jobs and planned programmes alike. We work across 114 places in Perth and Kinross, large and small. There’s a separate page for Edinburgh, about 20 miles away.
Anyone looking for fire stopping in KY13 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We also cover Wester Balgedie (1 mile south-west), Kinnesswood (1 mile south-east), Scotlandwell (2 miles south-east), Gateside (3 miles north) and Milnathort (3 miles west) for service penetrations. Bigger towns within reach include Perth (12 miles north), Auchterarder (15 miles west), Kinross (4 miles west), Letham (13 miles north-west), Scone (13 miles north) and Tulloch (14 miles north).
Landmarks near Glenlomond
Other landmarks nearby include Michael Bruce Cottage Museum (1.2 miles south-east) and Loch Leven Castle (2.7 miles south-west). Green spaces nearby include Loch Leven National Nature Reserve and Loch Leven.