Glenelg fire stopping
Work needed on a service penetration in Glenelg? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Non-fire-rated filler around services
- Fire seals cut back for extra cables and never reinstated
- Snag lists that include open service penetrations
Fire stopping in Glenelg
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Reviewing a building’s overall fire safety
- Walls or floors that aren’t fire-resisting to begin with
- Large openings beyond what any sealant detail covers
If in doubt, give us a call on 01277 525 020 or email the details over and we will say what we think before you book.
Where we work in Glenelg
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
Fire stopping for commercial buildings in Glenelg
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. Site teams most often ask us about head-of-wall gaps with no fire seal and improvised or mixed-product fire seals, on cable penetrations, service gaps in risers and small duct penetrations where the tested detail allows. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Glenelg, preparation and product choice get the time they need.
Around smaller places such as Glenelg, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Glenelg (IV40)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What sets the cost
Quotes vary with the job. It mainly depends on:
- Induction, permit and paperwork requirements
- How much there is to seal
- Working within restricted access windows
- Backing rod, priming and other preparation
A quote for service penetrations depends on quantities, condition and access. Call for a quote.
What to include in your enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- Any specification or named product
- Anything awkward about access or site hours
- What the building is and how it’s used
- A wide shot and a close-up of the area
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or use the quote form.
Also in Glenelg
Should maintenance staff do it?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. For work around Glenelg, we aim for one trip, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Let us know about inductions and permits
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
Get a fixed quote
To get a fixed quote, call 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
Signs you need fire stopping in Glenelg
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it, so it has to come out.
Site and facilities staff are often the first to spot these:
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
- Unsealed joints where partitions meet the slab
- Fire-stopping items raised at inspection or handover
Around Glenelg, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Questions to ask before you book
- How long is the guarantee, and what does it include?
- Whether their applicators hold CSCS cards
- Health and safety accreditation such as CHAS
- Will failed sealant be removed rather than covered?
Questions about Glenelg
Do you decide the fire-stopping details for buildings in Glenelg?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
How do the Scottish rules apply to fire-rated sealing in Glenelg?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Service penetrations in Glenelg buildings
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Schools such as Bernera School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Glenelg is in Highland. Across the IV40 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 256 places in Highland, from busy centres to rural villages.
Work on service penetrations is covered throughout IV40, for business premises of every kind. Buildings on Darach Court, Old Military Road and Allt Ruadh are within our area. We also cover Galltair (1 mile north-west), Glen More (1 mile east), Reraig (5 miles north), Auchtertyre (5 miles north) and Balmacara (5 miles north) for service penetrations. Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email drawings and photos.
Near you in Glenelg
Locally, jobs take us to sites close to Glenelg Inn. Green spaces nearby include Loch an t-Seachrain and Glas Bheinn.
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.