Fire Stopping in Forest Green
Sealant work in Forest Green for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Expanding foam used as fire stopping
- Open linear gaps along the top of fire-resisting walls
- Unsealed penetrations discovered above suspended ceilings
Fire stopping for businesses in Forest Green
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Forest Green, done properly
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on cable penetrations, small duct penetrations where the tested detail allows and linear gaps at wall heads, and what we’re called in for most is openings found when ceilings come down for a refit and penetration schedules that need working through. Whether you call it commercial sealant work, mastic application or joint sealing, in Forest Green it comes down to the same thing: the right product in a properly prepared joint.
For a smaller site near Forest Green, we plan to do all the penetrations in one go, so send the specification and photos first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Forest Green (RH5)
- Wider area
- Surrey
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Where services cross fire walls in Forest Green
For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Forest Green is about 27 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Halls and meeting rooms at places like Holy Trinity sometimes gain new services, and any compartment wall crossed needs the specified seal.
Forest Green is about 6 miles south-west of Dorking, in Surrey. We cover commercial sites throughout Forest Green, whether it’s a single job or part of a planned programme. Forest Green is one of 379 places in Surrey on our list. Sites around Brighton have their own page, roughly 25 miles from Forest Green.
Work on service penetrations is covered throughout RH5, for business premises of every kind. Streets here include Horsham Road and Ockley Road, and sites on any of them can send details for a fixed quote. If your building is just outside Forest Green, we cover Ockley (2 miles south-east), Abinger Bottom (2 miles north), Coldharbour (2 miles north-east), Friday Street (3 miles north) and Abinger Common (3 miles north). Bigger towns within reach include Guildford (10 miles north-west), Woking (13 miles north-west), Epsom (13 miles north-east), Horley (10 miles east), Redhill (11 miles north-east) and Ewell (15 miles north-east).
Landmarks near Forest Green
Around Forest Green, our work takes us to commercial buildings near The Parrot pub and Wallis Wood. Forest Green’s nearest station is Ockley station, about 2.6 miles east. Nearby you’ll also find Abinger Castle (2.9 miles north) and Mesolithic Museum (2.9 miles north). Green spaces nearby include Leith Hill and Vann Lake.
Towns and villages near Forest Green
What else we do in Forest Green
When something else is needed
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Gaps in walls that were never built as compartment walls
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can speak to us on 01277 525 020 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
Signs you need fire stopping in Forest Green
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it.
Things that usually lead to an enquiry:
- Penetration schedules that need working through
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
- Improvised or mixed-product fire seals
Around Forest Green, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Comparing quotes
- Their approach to joint depth and backing
- The named product and why it was chosen
- Will RAMS and insurance details be available?
- What the guarantee covers, and for how long
Your questions answered
Is a smaller place like Forest Green outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you decide the fire-stopping details for buildings in Forest Green?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do we ask for a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
How many days will you need on site?
It depends on the scope, but the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we will set out a timescale with the quote.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, which many sites require.
Keeping the joints sound
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Foam or ordinary sealant is never a fire-seal repair
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
- Have penetrations checked while they can still be seen
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Forest Green need work, visits can be combined. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Let us know about inductions and permits
- For older buildings, check the asbestos register before work
- Move anything stored against the joints
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Advice
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
What sets the cost
We price every job individually. The things that drive the figure:
- Joint width, depth and condition
- Specialist products, such as fire-rated or hygienic sealants
- Location, for remote and island sites
- The total length or number of joints
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- The site address and postcode
- Asbestos survey details if the building is older
- Access details, including height
- Clear photos of the problem areas
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or email us.