Fire-rated sealing and fire stopping in Ford, Buckinghamshire
Sealant work in Ford for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Unsealed openings around new pipes and cables
- Seals that don’t match their tested detail
- Old intumescent sealant that has split away
Fire stopping near Ford
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
For managing agents and facilities managers
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Ford can sit alongside others in a wider programme.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Fire stopping for commercial buildings in Ford
Facilities managers in Ford often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on linear gaps at wall heads, cable penetrations and small duct penetrations where the tested detail allows, and what we are called in for most is seals that don’t match their tested detail and hidden openings found during inspections. Whoever orders the work in Ford, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Ford, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or send photos by email and we will arrange a return visit.
- Place
- Ford (HP17)
- Region
- Buckinghamshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is one of these:
- Fire risk assessments, a job for a competent assessor
- Construction that lacks the fire resistance the seal relies on
- Issuing fire ratings or certificates for seals
If in doubt, call 01277 525 020 or email drawings and photos and we will say what we think.
Surfaces we seal
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- The total length or number of joints
- Working within restricted access windows
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- The postcode of the building
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- The asbestos register, for older buildings
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email drawings and photos if you’d rather talk the job through.
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself typically taking anything from one day to a planned run of visits, depending on the number of seals and the access. Smaller jobs around Ford can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Let building users know which areas are affected
- Tell us what induction or permit system the site runs
- Move anything stored against the joints
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or send photos by email.
Advice
Aftercare for building managers
Once the work is signed off, these steps help:
- Include service cupboards in routine inspections
- Foam or ordinary sealant is never a fire-seal repair
- Settle who seals which penetrations at the start of a project
- Get seals inspected before ceilings and boxing close
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
More services for Ford
Different surfaces, different methods
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits.
Common questions from Ford clients
Does your area include sites such as Haddenham Industrial Park, near Ford?
Yes, sites like Haddenham Industrial Park are within our area, along with the rest of Ford. Photos and a short description are enough for a first look.
Is hospital work, at somewhere like St John's Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
How long does a job like this take?
It depends on the scope, but the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we will give you a timescale with the quote.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Do you offer coloured sealant?
That depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Is fire stopping in Scotland covered by different guidance?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, using products tested for their end use.
Can you fire stop behind the services contractors?
Yes, where there is a specification for those walls and floors. Openings left by new services are among the most common jobs we see, and we reseal them to the specified detail.
Compartment walls and floors in Ford
Ford lies roughly 39 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Campus buildings at universities such as University Campus Aylesbury Vale (3.9 miles north-east of Ford) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. Theatres, wards and plant rooms at sites like St John's Hospital, 1.8 miles to the north of Ford, all have compartment walls crossed by services. Industrial units on estates such as Haddenham Industrial Park, 2.5 miles to the west of Ford, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Ford is about 4 miles south-west of Aylesbury, in Buckinghamshire. Businesses, contractors and managing agents in Ford use us for work on service penetrations, as part of our coverage of Buckinghamshire. 308 places across Buckinghamshire fall within our area, Ford among them. There’s a separate page for Oxford, about 15 miles away.
Postcode districts covered here: HP17 for service penetrations. Buildings on Linden Way and Chapel Road are within our area. If your building is just outside Ford, we cover Dinton (1 mile north-west), Upton (1 mile north), Bishopstone (2 miles east), Owlswick (2 miles south-east) and Sedrup (2 miles north-east). Nearby towns on our patch include Aylesbury (4 miles north-east), High Wycombe (11 miles south-east), Chesham (12 miles east), Marlow (15 miles south), Amersham (14 miles south-east) and Beaconsfield (15 miles south-east).
Landmarks near Ford
Locally, jobs take us to sites close to The Dinton Hermit Public House. The closest station to Ford is Haddenham & Thame Parkway station, roughly 2.8 miles west. Nearby you will also find Dinton Castle (1.6 miles north-west) and National Paralympic Heritage Centre (3.7 miles north-east). Not far away are Beacon Hill and Snakemoor.