Coloured and colour-matched sealant in Ford, Buckinghamshire
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Ford. Send photographs or drawings for a fixed quote.
- Fit-outs with a sealant colour in the specification
- Patch repairs in several different colours
- A bead that fights the cladding or frame colour
Need coloured sealant in Ford?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Ford
Stone, brick and cladding each bring their own colour challenge: sandstone, granite, brick and stained timber rarely have one flat colour. The aim is a sealant colour that sits comfortably against the whole surface. Most enquiries involve failed coloured sealant that has split or peeled and patch repairs in several different colours, on office fit-out finishes, powder-coated and anodised frames and shop-fit joinery and counters. Looking for mastic applicators who cover Ford? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Business units in the countryside around places like Ford are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Ford (HP17)
- Wider area
- Buckinghamshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Avoid piecemeal repairs on coloured joints
- Look at the cured colour before the full run
- Agree the sealant colour early and write it into the specification
- Note which sealant colour was used where
Expect some change in appearance over the years. Some fading is part of normal ageing outdoors, and a reseal brings it back.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches; fixing it early prevents rework.
Other services in Ford
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Smaller jobs around Ford can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
- Confirm the product named in the specification
Getting a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or email us with the site address and an outline of the work. You can also send details through our quote form.
Advice
Common questions from Ford clients
Will you take on work at estates like Haddenham Industrial Park, close to Ford?
Yes, sites like Haddenham Industrial Park are within our area, along with the rest of Ford. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Can you match sealant colours for premises in Ford?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Available colours for the product are confirmed with the quote.
What do you charge?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we will price it properly.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Common problems we fix in Ford
Colour-matched sealant is usually requested because a standard bead has spoiled the finish: a pale bead on a dark frame, or an old seal that has discoloured. A better-matched colour fixes the appearance without changing the joint’s job.
Site and facilities staff are often the first to spot these:
- Discoloured joints on a visible elevation
- Old colour-matched joints lifting at the edges
- Patch repairs in several different colours
- Standard-colour sealant spoiling a high-end finish
A unit on an estate like Haddenham Industrial Park, 2.5 miles west of Ford, typically has an office front, a trade counter and staff facilities with joints of their own.
Before you book anyone
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How they’ll work around occupants
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Sealant on show in Ford’s commercial buildings
The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Ford is about 39 miles from central London. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. If you have premises across the region, one contractor can cover them all.
Offices and shops close to stations such as Haddenham & Thame Parkway station (to the west of Ford) tend to be busy all day, so sealant work is planned around opening hours.
Ford is about 4 miles south-west of Aylesbury, in Buckinghamshire. Businesses, contractors and managing agents in Ford use us for work on colour-matched joints, as part of our coverage of Buckinghamshire. Ford is one of 308 places in Buckinghamshire on our list for colour-matched joints. We also cover Oxford, around 15 miles from Ford.
Business premises anywhere in HP17 are within our area for colour-matched joints. For a building on Linden Way and Chapel Road or nearby, send details and we will quote for colour-matched joints. We also cover Dinton (1 mile north-west), Upton (1 mile north), Bishopstone (2 miles east), Owlswick (2 miles south-east) and Sedrup (2 miles north-east) for colour-matched joints. Nearby towns on our patch include Aylesbury (4 miles north-east), High Wycombe (11 miles south-east), Chesham (12 miles east), Marlow (15 miles south), Amersham (14 miles south-east) and Beaconsfield (15 miles south-east).
What’s near Ford
In Ford, that means premises near The Dinton Hermit Public House. For rail, the closest station is Haddenham & Thame Parkway station, roughly 2.8 miles west of the centre. Other landmarks nearby include Dinton Castle (1.6 miles north-west) and National Paralympic Heritage Centre (3.7 miles north-east). Not far away are Beacon Hill and Snakemoor.
What affects the price in Ford
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Working within restricted access windows
- Distance, for remote addresses
- How much existing material needs removing
- Access and working height
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
However big the job, these details speed things up:
- Access details, including height
- A wide shot and a close-up of the area
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email drawings and photos.
Owners, agents and contractors
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.