Facade and window perimeter sealing in Ford, Buckinghamshire
Facade joint and window perimeter sealing on commercial buildings in Ford and across Buckinghamshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Failed seals around shopfront and entrance frames
- Discoloured or dirty facade joints
- Failed sealant on precast panel joints
Facade sealing across Ford
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Ford
Sometimes the substrate is the problem: if the edge of the render, concrete or coating breaks away, the bead goes with it. When the joint edges need repair first, we say so.
Look out for the following:
- Sealant pulling away from frames or panels
- Water coming in around window frames
- Discoloured or dirty facade joints
- Cold air coming in at window perimeters
On a campus such as University Campus Aylesbury Vale, 3.9 miles to the north-east of Ford, new teaching buildings and residences are usually built and refurbished around the academic year.
Questions to ask before you book
- What level of public liability insurance do they hold?
- Which product they’ll use, and why it suits the joint
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Can the work be phased to keep areas open?
About our facade sealing in Ford
Installing framed glazing systems isn’t part of our work. We handle the sealant joints that surround those elements: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds, using sealants classified for facade or glazing use. We work on window and door perimeters, shopfront frames and stone and brick facade joints, and what we’re called in for most is water coming in around window frames and sealant pulling away from frames or panels. A single leaking joint is often how a building in Ford first comes to us: we look at the rest while we’re there and tell you what we find.
Around smaller places like Ford, building work usually means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Ford (HP17)
- Wider area
- Buckinghamshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Other services in Ford
Why act early in Ford
A few metres of new sealant compare well with replacing ceilings, linings or damaged stock. Leaks travel along the structure. Halls, stores and units around places like Ford may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Ford
- Colour options checked against the specified product
- Specification-led, product-correct work
- Public liability insurance in place
- Joints cleaned back to sound surfaces
See how commercial sealant jobs are priced or how we’re accredited.
Facades, frames and programmes in Ford
Ford is about 39 miles from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme. Rainfall across the South East, Ford included, is lower than in many parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so the external programme keeps a little slack.
For a contractor working at a hospital such as St John's Hospital, 1.8 miles to the north of Ford, perimeter and facade sealing is planned around patients and deliveries. For contractors refurbishing units at places like Haddenham Industrial Park, which lies west of Ford, the mastic covers cladding panels, roller-door and window perimeters.
Ford is about 4 miles south-west of Aylesbury, in Buckinghamshire. Businesses, contractors and managing agents in Ford use us for work on facade joints, as part of our coverage of Buckinghamshire. Our Buckinghamshire coverage takes in 308 places, large and small. Oxford is covered too, some 15 miles away.
If you need facade sealing in HP17, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Linden Way and Chapel Road. We also cover Dinton (1 mile north-west), Upton (1 mile north), Bishopstone (2 miles east), Owlswick (2 miles south-east) and Sedrup (2 miles north-east) for facade joints. Nearby towns on our patch include Aylesbury (4 miles north-east), High Wycombe (11 miles south-east), Chesham (12 miles east), Marlow (15 miles south), Amersham (14 miles south-east) and Beaconsfield (15 miles south-east).
Local landmarks in Ford
Around Ford, our work takes us to commercial buildings near The Dinton Hermit Public House and the streets around them. Ford’s nearest station is Haddenham & Thame Parkway station, roughly 2.8 miles west of the centre. Nearby you will also find Dinton Castle (1.6 miles north-west) and National Paralympic Heritage Centre (3.7 miles north-east). For a walk, there’s Beacon Hill and Snakemoor.
How a job runs
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes anything from a single day to several weeks, depending on joint lengths, access and the weather, and we clear our waste as we work. Jobs in and around smaller places like Ford are normally planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Preparing the site
- Send your site hours and access windows
- Warn occupants and staff about the work
- Send any specification or drawings in advance
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email a schedule or drawings.
Related advice
Questions we’re asked in Ford
Is Ford too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Is Haddenham Industrial Park, near Ford, within your area?
Yes, sites like Haddenham Industrial Park are within our area, along with the rest of Ford. Photos and a short description are enough for a first look.
Do you install glazing systems?
No. We don’t install glazing systems, windows or glass. We seal the joints around them, including perimeters where frames meet the structure.
Do you provide access for facade work?
We agree access with the client at the start. Let us know what access is in place or planned, and we’ll price the work around it.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Plan facade sealing alongside redecoration
- Keep the sealant details on the building file
- Brief window cleaners about newly sealed joints
- Check the asbestos register before old mastic is disturbed
Keep a note of which product went in and when. It helps when matching repairs or planning the next reseal across the elevation.
Check older buildings for asbestos before disturbing old mastic. Older sealants can contain asbestos, and work stops until it’s tested if it’s suspected.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
What sets the cost
These are the things that shape the price:
- Access and working height
- The size and state of each joint
- Phasing around occupants
- How much there is to seal
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Your programme or deadline
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- Access details, including height
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.