Fire Stopping in Fintry
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Fintry and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings left by services added after handover
- Fire stopping installed outside its tested range
- Hidden openings found during inspections
Fire stopping near Fintry
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Fire stopping for commercial buildings in Fintry
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. We work on linear gaps at wall heads, pipe penetrations and small duct penetrations where the tested detail allows, and the failures we are asked to look at most are expanding foam used as fire stopping and old intumescent sealant that has split away. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Fintry, preparation and product choice get the time they need.
Hotels and care homes around smaller places like Fintry often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email a schedule or drawings and we’ll come back to it.
- Where
- Fintry (G63)
- Region
- Stirling
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Diagnose, treat, sign off
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. Travel to smaller Scottish places like Fintry is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Send your site hours and access windows
- Tell staff and tenants when we’ll be in
- Send any specification or drawings in advance
Ask for a quote
To get a fixed quote, speak to us on 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Advice
What sets the cost
Before we quote, we look at:
- Which sealant the job calls for
- Access and working height
- Induction, permit and paperwork requirements
- Joint width, depth and condition
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Where the site is, with the postcode
- Any specification or named product
- Asbestos survey details if the building is older
- Photos of the joints, close up and from further back
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email the details over with what you know.
Compartments and services around Fintry
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a hotel such as Culcreuch Castle Hotel, 0.5 miles to the north-east of Fintry, penetration seals are worth checking after any refit or services upgrade.
Fintry is about 9 miles north of Kirkintilloch, in Stirling. Looking for fire stopping in Fintry? We can help. Our Stirling coverage takes in 52 places. For work in that direction, see our Glasgow page (14 miles or so).
Business premises anywhere in G63 are within our area. If your site is on Main Street, Culcreuch Avenue and Kippen Road or close by, we can quote for service penetrations. We also cover Balfron (4 miles west), Clachan of Campsie (5 miles south), Buchlyvie (5 miles north-west), Boquhan (5 miles west) and Haughhead (5 miles south) for service penetrations. A short drive away, we cover Stirling (12 miles east), Dunblane (14 miles north-east), St. Ninians (11 miles east), Raploch (12 miles north-east), Cornton (12 miles north-east) and Torbrex (11 miles east).
Landmarks near Fintry
Other landmarks nearby include Culcreuch Castle (0.5 miles north-east). Not far away are Stronend.
Places near Fintry
Also in Fintry
Fintry: questions and answers
Do you decide the fire-stopping details for buildings in Fintry?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
How do Scotland’s building standards affect fire-rated sealant in Fintry?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do you work in Fintry?
Yes. We cover Fintry. For a quote, ring 01277 525 020 or email drawings and photos.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
What we’re called out for in Fintry
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
It’s worth sending us details if you spot any of the following:
- Penetration schedules that need working through
- Open linear gaps along the top of fire-resisting walls
- Expanding foam used as fire stopping
- Fire sealant pulled out of the opening
For a building such as Old Fintry Parish Church, new heating or data runs are the usual reason penetrations need sealing.
What to look for in a quote
- What the guarantee covers, and for how long
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Health and safety accreditation such as CHAS
- Is the sealant right for the movement and the substrate?
Commercial clients in Fintry
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Fintry can sit alongside others in a wider programme across Stirling.
Leave it or put it right?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme, so earlier action pays back. Around smaller places like Fintry, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Constructionline member for supplier checks
- Work carried out by CSCS-carded applicators
- 12 months’ guarantee on every job
- Sealing commercial buildings since 2005
Read how commercial sealant jobs are priced or how we’re accredited.