Fire Stopping in Falkirk
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Falkirk and the surrounding area. Send photos or drawings for a fixed quote.
- Seals disturbed by maintenance and left open
- Old intumescent sealant that has split away
- Openings left by services added after handover
Fire stopping across Falkirk
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Falkirk
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. If you have expanding foam used as fire stopping and unsealed penetrations discovered above suspended ceilings, we can put it right, whatever the surface. Facilities teams, main contractors and managing agents in Falkirk tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Towns the size of Falkirk have schools, care homes, health centres and offices divided into fire compartments. Scotland’s building standards expect service penetrations to keep the wall or floor’s fire resistance, so the seal must match a tested detail.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
Falkirk: questions and answers
Can work at a site such as Forth Valley College - Falkirk Campus fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Will you take on work at estates like Central Retail Park, close to Falkirk?
Yes. Estates, retail parks and business parks around Falkirk, Central Retail Park among them, are all within reach. A few photos and the unit address let us price the work.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Do you work in Falkirk?
Yes. We cover Falkirk, and you can call the office on 01277 525 020 or email drawings and photos to get started.
Is sealant suitable for all service openings?
No. A sealant’s evidence covers set services, gaps and wall or floor types. If an opening falls outside, it needs another solution, as set out by the designer.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Nearby places to Falkirk
Also in Falkirk
Quoting for work in Falkirk
Quotes vary with the job. Expect it to depend on:
- Induction, permit and paperwork requirements
- Working within restricted access windows
- The product specified
- Joint width, depth and condition
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- How the joints are reached, and at what height
- The site address and postcode
- Drawings or a marked-up plan, if available
- Your programme or deadline
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
How the job changes by surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, with backing added if the detail requires it.
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Compartments and services around Falkirk
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified. The area within 2 miles of Falkirk holds several hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Halls and meeting rooms at places like St. Francis Xavier's Roman Catholic Church sometimes gain new services, and any compartment wall crossed needs the specified seal. Refits at places like Central Retail Park (less than half a mile north-east of Falkirk) often reroute services through walls between units. In a hotel such as Orchard Hotel, less than half a mile east of Falkirk, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Falkirk is about 21 miles north-east of Glasgow, in Falkirk. Any commercial site in Falkirk is covered. We work across 53 places in Falkirk, large and small. Glasgow is covered too, some 21 miles away.
Business premises anywhere in FK2, FK1, FK4 and FK6 are within our area. We cover commercial and managed buildings on High Street, High Station Road and Main Street. With the A9 and A803 nearby, Falkirk is straightforward for us to reach. We also cover Bainsford (1 mile north), Carron (2 miles north), Carronshore (2 miles north), Glensburgh (2 miles north-east) and Skinflats (2 miles north-east). Bigger towns within reach include Bo'ness (7 miles east), Denny (5 miles west), Bonnybridge (4 miles west), Polmont (3 miles east), Brightons (3 miles south-east) and Kinneil (6 miles east).
Local landmarks in Falkirk
Locally, jobs take us to sites close to Falkirk High School, Callendar Park and The Goose On Newmarket pub and the streets around them. There’s a railway station in Falkirk itself: Falkirk Grahamston station. Well-known places in the area include Torwood Castle (4 miles north-west) and Falkirk Community Hospital (less than half a mile south-west). Green spaces nearby include Callendar Lake.
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Deciding what a wall or floor needs, which belongs to the designer
- Issuing fire ratings or certificates for seals
- Reviewing a building’s overall fire safety
If in doubt, ring 01277 525 020 or email the details over and we will say what we think.
Where we work in Falkirk
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
Our process
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in Falkirk are planned with two things in mind: the forecast for external joints and the building’s hours for internal ones. Photos or drawings let us give a fixed quote and a realistic plan.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Explain the parking and delivery arrangements
- Move anything stored against the joints
- Let building users know which areas are affected
Get a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, phone 01277 525 020 or use the quote form.