Fire-rated sealing and fire stopping in Brightons, Falkirk
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Brightons and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Seals that don’t match their tested detail
- Fire-stopping items raised at inspection or handover
- Service penetrations left open after M&E works
Need fire stopping in Brightons?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Brightons
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. If you’re dealing with expanding foam used as fire stopping and fire-rated sealant that has cracked or shrunk back, we can put it right, whatever the surface. Facilities teams, main contractors and managing agents in Brightons tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Travel to smaller places like Brightons is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Brightons (FK2)
- Wider area
- Falkirk
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Compartment walls and floors in Brightons
There are a number of hotels within about 2 miles of Brightons. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Workshops and IT rooms at colleges like SPS College (less than half a mile north-west of Brightons) are re-serviced often, leaving penetrations to seal. For a unit at a site such as Redding Industrial Estate, 0.9 miles to the west of Brightons, new power or data runs between office and warehouse can breach a compartment wall.
Brightons is about 2 miles south of Grangemouth, in Falkirk. We cover Brightons, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Falkirk, 53 places are covered, Brightons among them. There’s a separate page for Edinburgh, roughly 20 miles from Brightons.
If you need fire stopping in FK2, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Main Street, Park Terrace and Charlotte Street, and sites on any of them can send details for a fixed quote. Access to Brightons is via the B805 among other routes, so getting applicators and materials to site is simple. We also cover Rumford (1 mile south-east), Wallacestone (1 mile west), Polmont (1 mile north-east), Reddingmuirhead (1 mile west) and Maddiston (1 mile south-east) for service penetrations. A short drive away, we cover Falkirk (3 miles north-west), Bo'ness (5 miles north-east), Larbert (5 miles north-west), Stenhousemuir (5 miles north-west), Denny (8 miles west) and Bonnybridge (7 miles west).
Landmarks near Brightons
There’s a railway station in Brightons itself: Polmont station. Other landmarks nearby include Falkirk Community Hospital (3 miles north-west) and Grangemouth Museum (2 miles north). For a walk, there’s Cockleroy and Callendar Lake.
What we can’t put right
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Walls or floors that aren’t fire-resisting to begin with
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just call the office on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Joints and surfaces we work on
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
Diagnose, treat, sign off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before we move to the next. Jobs near Brightons are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Tell staff and tenants when we will be in
- Send asbestos survey details if the building is pre-2000
- Clear stock, furniture or equipment away from the joints
Ask for a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Advice
FAQs: Brightons
Is Redding Industrial Estate, near Brightons, within your area?
Yes. We cover Brightons and the area around it, including industrial estates, business parks and retail parks such as Redding Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
What do Scotland’s building standards say about service penetrations in Brightons?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail. We confirm material and size first and tell you if sealant isn’t the right product.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed and the installation has to fit inside those limits.
Nearby places to Brightons
What else we do in Brightons
Why deal with it now?
The longer openings stay, the more there tend to be: each new service adds to the list. Keeping on top of it after each round of works keeps the job small and avoids a much larger catch-up later. For buildings near Brightons, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why clients in Brightons choose us
- Clear, fixed quotes
- Constructionline member for supplier checks
- One phone line for London, the South East and Scotland
- CHAS accredited contractor
What we are called out for in Brightons
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it and has to be removed.
What tends to prompt an enquiry:
- Fire sealant pulled out of the opening
- Non-fire-rated filler around services
- Openings left by services added after handover
- Damaged fire seals in risers and voids
Large healthcare estates like Falkirk Community Hospital (to the north-west of Brightons) change their services often, so penetration seals are worth checking after M&E work.
Comparing quotes
- How they’ll work around occupants
- Their pre-qualification and accreditations
- How the existing material will be dealt with
- Whether primer will be used where the manufacturer specifies it
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.