Fire Stopping in Erbusaig
Fire-rated and intumescent sealing of service penetrations and linear gaps in Erbusaig. CHAS accredited and fully insured, with a 12-month guarantee.
- Expanding foam used as fire stopping
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
Need fire stopping in Erbusaig?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Different surfaces, different methods
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail, and we tell you if the bundle exceeds what sealant covers.
How we handle fire stopping in Erbusaig
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and what we’re called in for most is improvised or mixed-product fire seals and expanding foam used as fire stopping. Whoever orders the work in Erbusaig, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In smaller Scottish places like Erbusaig, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Erbusaig (IV40)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- The size and state of each joint
- Site requirements such as inductions and permits
- Specialist products, such as fire-rated or hygienic sealants
- Whether old sealant has to be cut out first
A quote for service penetrations depends on quantities, condition and access, and any specification that applies. Call for a quote.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- The site address and postcode
- The product your specification calls for
- A wide shot and a close-up of the area
- When you need the work done
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or email us if you’d rather talk the job through.
What we are called out for in Erbusaig
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it and has to be removed.
Site and facilities staff are often the first to spot these:
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
For a school such as Lochalsh School, penetration sealing fits best at the end of the summer works.
What your quote should include
- Whether their applicators hold CSCS cards
- Will RAMS and insurance details be available?
- How joint depth will be controlled
- Health and safety accreditation such as CHAS
Common questions from Erbusaig clients
Do you work on fire-rated sealing in hotels in Erbusaig?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
How do Scotland’s building standards affect fire-rated sealant in Erbusaig?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months.
Can the building stay open while you work?
In most cases, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Why act early in Erbusaig
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Around smaller places like Erbusaig, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a fixed quote when you’re ready.
Why clients in Erbusaig choose us
- Work to your specification and the manufacturer’s guidance
- Health and safety: CHAS accredited
- Commercial sealant work since 2005
- One number for every site we cover
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Openings that need collars, wraps, batts or boards rather than sealant
- Signing off or certifying a building’s fire stopping
- Deciding what a wall or floor needs, which belongs to the designer
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we’ll say what we think.
What we seal
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Erbusaig is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell us what induction or permit system the site runs
- Send your site hours and access windows
- Tell us which areas need to stay in use
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or email drawings and photos with what you know.
Read more
Penetration seals near Erbusaig
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail. A number of hotels sit less than 2 miles from Erbusaig. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
For a hotel such as Tingle Creek Hotel, less than half a mile south-west of Erbusaig, penetration seals are worth checking after any refit or services upgrade.
Erbusaig is in Highland. If you’re looking for fire stopping in Erbusaig, we can help. 256 places across Highland fall within our area, including Erbusaig.
Business premises anywhere in IV40 are within our area for service penetrations. Nearby places we also cover include Drumbuie (1 mile north-east), Kyle of Lochalsh (1 mile south), Kyleakin (2 miles south), Balmacara (3 miles east) and Plockton (4 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call 01277 525 020 or email the details over.
Near you in Erbusaig
For rail, the closest station is Duirinish station, roughly 1.5 miles north-east of the centre. Nearby you will also find Bright Water Visitor Centre (2.1 miles south) and Duncraig Castle (4 miles north-east). Not far away are Loch Scalpaidh.