Fire Stopping in Drumbuie
Need fire stopping in Drumbuie? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire sealant pulled out of the opening
- Improvised or mixed-product fire seals
- Service penetrations left open after M&E works
Fire stopping across Drumbuie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Fire doors, dampers or other fire safety equipment
- Openings that need collars, wraps, batts or boards rather than sealant
- Issuing fire ratings or certificates for seals
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
Surfaces we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
About our fire stopping in Drumbuie
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. Site teams most often ask us about service penetrations left open after M&E works and improvised or mixed-product fire seals, on joints between fire-resisting walls and floors, linear gaps at wall heads and pipe penetrations. Most enquiries from Drumbuie start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Travel to smaller places like Drumbuie is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Where
- Drumbuie (IV40)
- Region
- Highland
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Other services in Drumbuie
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building near Drumbuie, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Move anything stored against the joints
Request a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, phone 01277 525 020 or email us.
Read more
How the job changes by surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers first.
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail.
Questions about Drumbuie
Will you design a fire-stopping scheme for our building in Drumbuie?
No, that sits with the designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Is a smaller place like Drumbuie outside your area?
No. Small places get the same service as large ones. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
How long does a typical visit take?
It depends on the scope, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we’ll set out a timescale with the quote.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Service penetrations in Drumbuie buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a hotel such as Tingle Creek Hotel, 1.3 miles south-west of Drumbuie, penetration seals are worth checking after any refit or services upgrade.
Drumbuie is in Highland. Drumbuie sits inside our coverage and the rest of Highland, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Highland, 256 places are covered, including Drumbuie.
We take on service penetrations across the IV40 postcode area, whatever the building. Close to Drumbuie, our area also takes in Erbusaig (1 mile south-west), Plockton (2 miles north-east), Kyle of Lochalsh (2 miles south), Balmacara (3 miles south-east) and Kyleakin (3 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call 01277 525 020 or email drawings and photos.
Around Drumbuie
Recent enquiries here include premises near Plockton High School. There’s a railway station in Drumbuie itself: Duirinish station. Well-known places in the area include Duncraig Castle (2.7 miles north-east) and Bright Water Visitor Centre (3.2 miles south-west). For a walk, there’s Loch Palascaig.
Common problems we fix in Drumbuie
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
Any of the following is a good reason to get the joints checked over:
- Open linear gaps along the top of fire-resisting walls
- Seals disturbed by maintenance and left open
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
In a school such as Lochalsh School, fire-rated sealant goes in around service penetrations where it is specified.
Comparing quotes
- How the existing material will be dealt with
- What site paperwork they can supply
- Can the work be phased to keep areas open?
- Who will actually carry out the work
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Check with the data sheet before painting over fire sealant
- Brief every trade that openings they make must be sealed
- Check risers and ceiling voids after each round of works
- Have penetrations checked while they can still be seen
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Backing rod, priming and other preparation
- The total length or number of joints
- Removal of failed or old sealant
- Travel to remote or island sites
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- The product your specification calls for
- What the building is and how it’s used
- Access details, including height
- A wide shot and a close-up of the area
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, call 01277 525 020 or use the quote form.