Fire-rated sealing and fire stopping in East Haven, Angus
Sealant work in East Haven for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Improvised or mixed-product fire seals
- Unsealed openings around new pipes and cables
- Fire sealant pulled out of the opening
Fire stopping for businesses in East Haven
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in East Haven
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. The enquiries we see most involve builders’ foam or ordinary silicone in compartment walls and damaged fire seals in risers and voids, across small duct penetrations where the tested detail allows, pipe penetrations and service gaps in risers. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in East Haven, preparation and product choice get the time they need.
Around smaller places such as East Haven, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- East Haven (DD7)
- Region
- Angus
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Fire doors, dampers or other fire safety equipment
- Deciding what a wall or floor needs, which belongs to the designer
- Plastic pipes whose detail calls for a collar or wrap
If you are not sure, just call 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Where we work in East Haven
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Linear gaps at wall heads
Diagnose, treat, sign off
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Travel to smaller Scottish places like East Haven is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Confirm the product named in the specification
- Move anything stored against the joints
- For older buildings, check the asbestos register before work
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or use the quote form with what you know.
Advice
Common questions from East Haven clients
Do you seal service penetrations in hotels around East Haven?
Yes. We install fire-rated and intumescent sealant where it is specified. Each seal follows the tested detail, and rooms are done in turn.
Will you take on work at estates like Dundee Road Retail Park, close to East Haven?
Yes. We cover East Haven and the area around it, including industrial estates, business parks and retail parks such as Dundee Road Retail Park. A few photographs and the unit address let us price the work.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or use the quote form. Include photographs or drawings if you have them.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Owners, agents and contractors
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in East Haven can sit alongside others in a wider programme across Angus.
Places near East Haven
What else we do in East Haven
Where services cross fire walls in East Haven
East Haven has several hotels close by, all within 2 miles. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Hospital estates such as Hospital of St John the Baptist, 3.4 miles north-east of East Haven, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Schools such as Carnoustie High School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. Shop fits on retail sites such as Dundee Road Retail Park (to the north-east of East Haven) can bring new services through fire-resisting walls between units, to be sealed with the specified product.
East Haven is about 4 miles south-west of Arbroath, in Angus. East Haven sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. 65 places across Angus fall within our area, including East Haven. There’s a separate page for Dundee, roughly 12 miles from East Haven.
Postcode districts covered here: DD7 for service penetrations. Buildings on Torrie Park and Beach Road are within our area for service penetrations. Close to East Haven, our area also takes in Panbride (1 mile west), West Haven (2 miles south-west), Balmirmer (2 miles north-west), Carlogie (2 miles west) and Carnoustie (2 miles south-west). Nearby towns on our patch include Arbroath (4 miles north-east), Forfar (12 miles north-west), Monifieth (6 miles west), Brechin (15 miles north), Hunter's Town (3 miles south-west) and Gardynebourg (3 miles south-west).
Near you in East Haven
East Haven’s nearest station is Carnoustie station, roughly 1.8 miles south-west. A little further out are Hospital of St John the Baptist (3.4 miles north-east) and Panmure Castle (2.9 miles west).
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What affects the price in East Haven
Before we quote, we look at:
- How accessible the joints are
- The product specified
- How much existing material needs removing
- Joint width, depth and condition
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- Where the site is, with the postcode
- How the joints are reached, and at what height
- What the building is and how it’s used
- Rough lengths or quantities, or drawings if you have them
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Surface by surface
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. The specified product and backing for that movement are what goes in, with no gaps along the run.