Fire stopping in Dunure
Planning work on a service penetration in Dunure? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire seals cut back for extra cables and never reinstated
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
Fire stopping in Dunure
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Signing off or certifying a building’s fire stopping
- Plastic pipes whose detail calls for a collar or wrap
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
About our fire stopping in Dunure
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal, not a rule of thumb. Site teams most often ask us about head-of-wall gaps with no fire seal and fire seals cut back for extra cables and never reinstated, on pipe penetrations, joints between fire-resisting walls and floors and service gaps in risers. A single leaking joint is often how a building in Dunure first comes to us: we look at the rest while we are there and tell you what we find.
In smaller Scottish places like Dunure, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Dunure (KA7)
- Region
- South Ayrshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Dunure
Quotes vary with the job. Expect it to depend on:
- Working within restricted access windows
- Induction, permit and paperwork requirements
- Whether old sealant has to be cut out first
- Quantities, in metres or numbers
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
However big the job, the same details help:
- Photos of the joints, close up and from further back
- What the building is and how it’s used
- Approximate linear metres or a joint schedule
- Your programme or deadline
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or use the quote form.
Compartment walls and floors in Dunure
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
Wherever services are added at a hospital such as Seafield Children's Hospital, 5.5 miles north-east of Dunure, the compartment line has to be made good with the specified product.
Dunure is about 6 miles south-west of Ayr, in South Ayrshire. Businesses, contractors and managing agents in Dunure can call on us for service penetrations, as part of our coverage of South Ayrshire. 48 places across South Ayrshire fall within our area, including Dunure. Glasgow is covered too, some 36 miles away.
Postcode districts covered here: KA7 for service penetrations. Among the streets we cover are Arran View, Carrick Place and Kennedy Drive, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Fisherton (1 mile north-east), Doonfoot (5 miles north-east), Minishant (5 miles east), Maybole (5 miles south-east) and Kirkoswald (5 miles south). Bigger towns within reach include Ayr (6 miles north-east), Troon (11 miles north-east), Prestwick (9 miles north-east), Heathfield (8 miles north-east), Belmont (6 miles north-east) and Forehill (7 miles north-east).
What’s near Dunure
The closest station to Dunure is Maybole station, roughly 4.5 miles south-east. Well-known places in the area include Seafield Children's Hospital (5.5 miles north-east) and Dunure Castle (under half a mile west). For a walk, there’s Mochrum Loch.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Maintenance after handover
A few simple habits keep the new joints working:
- Report damaged or disturbed seals as soon as they’re spotted
- Check with the data sheet before painting over fire sealant
- Foam or ordinary sealant is never a fire-seal repair
- Include service cupboards in routine inspections
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted, and the data sheet says which.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
Dunure: questions and answers
What do Scotland’s building standards say about service penetrations in Dunure?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Dunure too far out for you?
No. Small places get the same service as large ones. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member.
How do I request a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months on every job.
When to call us in Dunure
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
Look out for the following:
- Fire seals cut back for extra cables and never reinstated
- Openings found when ceilings come down for a refit
- Fire sealant pulled out of the opening
- Builders’ foam or ordinary silicone in compartment walls
In a building such as Kirkbride Old Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Questions to ask before you book
- Do they follow the manufacturer’s priming guidance?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Will RAMS and insurance details be available?
- What level of public liability insurance do they hold?
More services for Dunure
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. For work around Dunure, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Tell us which areas need to stay in use
- Share your working hours and any access restrictions
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or use the quote form if you’d rather talk the job through.