Fire stopping in Dollar
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Dollar and the surrounding area. Send details for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Service penetrations left open after M&E works
- Head-of-wall gaps with no fire seal
Fire stopping near Dollar
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Cost factors for service penetrations
The price varies from site to site. Expect it to depend on:
- Location, for remote and island sites
- Any access equipment needed
- Removal of failed or old sealant
- Whether the work must be split into stages
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Any dates the work must fit around
- Specification clauses that apply
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
To get a fixed quote, call 01277 525 020 or email the details over with the site address and an outline of the work. Our quote form is another easy route.
About our fire stopping in Dollar
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. The enquiries we see most involve unsealed penetrations discovered above suspended ceilings and fire seals cut back for extra cables and never reinstated, across small duct penetrations where the tested detail allows, service gaps in risers and cable penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Dollar is the same: the right product in a properly prepared joint.
For a building near Dollar, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Dollar (FK14)
- Wider area
- Clackmannanshire
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Dollar. We will confirm the plan with the fixed quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Make sure the joints can be reached
- Share your working hours and any access restrictions
- For older buildings, check the asbestos register before work
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Read more
Where services cross fire walls in Dollar
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a building such as Old Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Buildings near Dollar get the fire-rated product that’s specified, installed to its tested detail.
Dollar is about 6 miles north-east of Alloa, in Clackmannanshire. Across the FK14 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Dollar is one of 13 places in Clackmannanshire on our list for service penetrations. Sites around Edinburgh have their own page, about 24 miles away.
If you need fire stopping in FK14, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Station Road, High Street and Manse Road. With the A91 and B913 nearby, Dollar is straightforward for us to reach. Close to Dollar, our area also takes in Blairingone (1 mile south-east), Tillicoultry (3 miles west), Pool of Muckhart (3 miles north-east), Devonside (3 miles south-west) and Coalsnaughton (3 miles south-west). Further afield, our area takes in Alloa (6 miles south-west), Tullibody (7 miles west), Alva (5 miles west), Clackmannan (5 miles south-west), Sauchie (5 miles south-west) and Menstrie (7 miles west).
Near you in Dollar
In Dollar, that means premises near Dollar Arms and the streets around them. Nearby you’ll also find Castle Campbell (0.8 miles north). Open spaces near Dollar include King's Seat Hill and Gartmorn Dam Country Park and Nature Reserve.
Commercial clients in Dollar
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Your questions answered
Can you produce the fire-stopping design for a job in Dollar?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Is Dollar too far out for you?
Not at all. Dollar is within our area. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Leave it or put it right?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Around smaller places like Dollar, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What you get with us
- Old sealant cut out, never sealed over
- One phone line for London, the South East and Scotland
- Public liability insurance in place
- Constructionline member
Read our cost guide and our accreditations.
Nearby places to Dollar
Also in Dollar
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Flag new cables with no seal around them
- Keep product data and details in the fire safety file
- Keep general-purpose fillers away from compartment walls
- Look above ceilings when tiles are lifted for other jobs
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned, and installation follows the programme.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Gaps in walls that were never built as compartment walls
- Fire doors, dampers or other fire safety equipment
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can ring 01277 525 020 or email us and we will tell you honestly.
Joints and surfaces we work on
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows