Fire stopping in Clackmannan
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Clackmannan. Send details for a fixed quote.
- Fire-rated sealant that has cracked or shrunk back
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
Fire stopping for businesses in Clackmannan
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Clackmannan
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. Site teams most often ask us about open linear gaps along the top of fire-resisting walls and improvised or mixed-product fire seals, on service gaps in risers, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Clackmannan is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In smaller Scottish places like Clackmannan, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Clackmannan (FK10)
- Wider area
- Clackmannanshire
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Clackmannan
Can you work on a hospital site such as Stirling District Lunatic Asylum?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Will you take on work at estates like Cooperage Way Business Village, close to Clackmannan?
Yes. We cover Clackmannan and the area around it, including industrial estates, business parks and retail parks such as Cooperage Way Business Village. To start, just ring 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
How long does a job like this take?
It depends on the scope, but the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Do you offer coloured sealant?
That depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Also near Clackmannan
What else we do in Clackmannan
What we can’t put right
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Reviewing a building’s overall fire safety
- Deciding what a wall or floor needs, which belongs to the designer
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just call the office on 01277 525 020 or email us and we will give you a straight answer before you book.
What we seal
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
Fire-rated sealing for Clackmannan buildings
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail. Clackmannan has two care or nursing homes no more than 2 miles away. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail.
Colleges such as Forth Valley College - Alloa Campus, 1.6 miles to the west of Clackmannan, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. For a school such as Alloa Academy, penetration sealing fits best at the end of the summer works. For a building at a site such as Cooperage Way Business Village, which lies north-west of Clackmannan, a check of penetration seals after each fit-out is good practice.
Clackmannan is about 2 miles south-east of Alloa, in Clackmannanshire. Any commercial site in Clackmannan is covered. 13 places across Clackmannanshire fall within our area, including Clackmannan. Sites around Edinburgh have their own page, roughly 24 miles from Clackmannan.
Business premises anywhere in FK10 are within our area. Buildings on Cattle Market, Main Street and High Street are within our area for service penetrations. Being close to the B910, Clackmannan is straightforward for us to reach. Sites close to Clackmannan are covered too, including Sauchie (2 miles north-west), Alloa (2 miles north-west), Fishcross (2 miles north), Coalsnaughton (2 miles north) and Devonside (3 miles north). A short drive away, we cover Tullibody (4 miles north-west), Dollar (5 miles north-east), Alva (4 miles north-west) and Menstrie (5 miles north-west).
Near you in Clackmannan
The closest station to Clackmannan is Alloa station, roughly 1.7 miles north-west of the centre. Nearby you will also find Alloa Museum And Gallery (1.9 miles west) and Old Tulliallan Castle (2 miles south-east). Green spaces nearby include Gartmorn Dam Country Park and Nature Reserve.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
Different surfaces, different methods
Risers and ceiling voids
Voids hide a lot of unsealed openings. We follow your schedule area by area.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Foam or ordinary sealant is never a fire-seal repair
- Get seals inspected before ceilings and boxing close
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
How a job runs
At the end of each section, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Clackmannan, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Tell us which areas need to stay in use
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
Request a quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Read more
What affects the price in Clackmannan
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Whether the work must be split into stages
- Removal of failed or old sealant
- Access and working height
- How much there is to seal
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- The product your specification calls for
- Anything awkward about access or site hours
- The site address and postcode
- Clear photographs of the problem areas
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or send photos by email.