Fire stopping in Devonside
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Devonside and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Expanding foam used as fire stopping
- Unsealed joints where partitions meet the slab
- Unsealed penetrations discovered above suspended ceilings
Fire stopping in Devonside
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Devonside
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail rather than guesswork. If you have fire sealant pulled out of the opening and snag lists that include open service penetrations, we can help, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Devonside it comes down to the same thing: the right product in a properly prepared joint.
Hotels and care homes around smaller places like Devonside often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email us and we will come back to it.
- Place
- Devonside (FK13)
- Region
- Clackmannanshire
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Devonside
Your fixed quote is built from the real scope. It takes account of:
- Any access equipment needed
- Quantities, in metres or numbers
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- The product your specification calls for
- Drawings or a marked-up plan, if available
- Access details, including height
- The type of building and who uses it
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Your questions answered
Is Devonside too small for you to travel to?
No. Places such as Devonside are covered as much as the big towns. We work across every Scottish council area. Good photographs up front let us bring everything on the first visit.
Will you work in a care home in Devonside without moving residents out?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
Is fire stopping in Scotland covered by different guidance?
Building standards in Scotland are separate from England’s, while England relies on Approved Document B. Either way, we install the specified sealant to its tested detail.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How do we ask for a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email a schedule or drawings. Photos, drawings or a joint schedule help us quote quickly.
Do you approve fire stopping for building control?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. Our part is fitting the specified product to its tested detail.
Building owners, agents and FMs in Devonside
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Nearby places to Devonside
Other services in Devonside
From enquiry to sign-off
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Tell us who will meet us and how to get in at your building near Devonside. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Tell us what induction or permit system the site runs
- Arrange parking or a loading space
- Point out any areas we must not close
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Read more
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Fire risk assessments, a job for a competent assessor
- Gaps in walls that were never built as compartment walls
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
What we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
Should maintenance staff do it?
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How the job changes by surface
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we will say if that applies.
Fire stopping in Devonside: the local picture
There are three care or nursing homes within about 2 miles of Devonside. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. We install fire-rated sealant to the tested detail where it is specified. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
For a unit at a site such as Industrial Estate, which lies west of Devonside, new power or data runs between office and warehouse can breach a compartment wall. Holiday works at schools like Alva Academy often leave service openings to seal before pupils return. Workshops and IT rooms at colleges like Forth Valley College - Alloa Campus (to the south-west of Devonside) are re-serviced often, leaving penetrations to seal.
Devonside is about 3 miles north-east of Alloa, in Clackmannanshire. Businesses, contractors and managing agents in Devonside use us for work on service penetrations. Our Clackmannanshire coverage takes in 13 places, large and small. Edinburgh is covered too, some 25 miles away.
We take on service penetrations across the FK13 postcode area, whatever the building. For a building on Ochilview, Alexandra Street and The Glen or nearby, send details and we will quote for service penetrations. We also cover Coalsnaughton (1 mile south), Tillicoultry (1 mile north), Fishcross (1 mile south-west), Sauchie (2 miles south-west) and Alloa (3 miles south-west) for service penetrations. A short drive away, we cover Tullibody (4 miles west), Dollar (3 miles north-east) and Menstrie (4 miles west).
Local landmarks in Devonside
For rail, the closest station is Alloa station, about 2.7 miles south-west. Nearby you’ll also find Castle Campbell (3.2 miles north-east) and Alloa Museum And Gallery (2.9 miles south-west). Green spaces nearby include Gartmorn Dam Country Park and Nature Reserve and King's Seat Hill.