Cuxton fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Cuxton and the surrounding area. Send photographs or drawings for a fixed quote.
- Seals disturbed by maintenance and left open
- Penetration schedules that need working through
- Unsealed joints where partitions meet the slab
Fire stopping for Cuxton sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why act early in Cuxton
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach and each detail can be checked as we go. For buildings around smaller places like Cuxton, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why us?
- Our applicators hold CSCS cards
- 12 months’ guarantee on every job
- Joints cleaned back to sound surfaces
- Constructionline member
Read how commercial sealant jobs are priced or how we’re accredited.
About our fire stopping in Cuxton
No fire sealant works on its own: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. Most enquiries involve unsealed joints where partitions meet the slab and service penetrations left open after M&E works, on cable penetrations, pipe penetrations and linear gaps at wall heads. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Cuxton, that means joint design, primers and backing rod as standard.
Barn and farm-building conversions near places like Cuxton often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Work we carry out in Medway comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or use the quote form and we will come back to it.
- Place
- Cuxton (ME2)
- Region
- Medway
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Places near Cuxton
More services for Cuxton
Fire stopping in Cuxton: the local picture
Cuxton lies roughly 25 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
At a university such as University for the Creative Arts - Rochester, which lies east of Cuxton, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. For a hospital such as French Hospital (2.4 miles east of Cuxton), penetration sealing is usually phased ward by ward, with infection-control rules agreed first.
Cuxton is about 2 miles south-west of Rochester, in Medway. Any commercial site in Cuxton is covered. We work across 54 places in Medway, large and small. Our London page has more on work in that area (25 miles or so).
Postcode districts covered here: ME2. Among the streets we cover are Station Road, Charles Drive and James Road. Nearby places we also cover include Lower Bush (1 mile west), North Halling (1 mile south-west), Upper Bush (1 mile west), Borstal (1 mile east) and Halling (2 miles south) for service penetrations. Further afield, our area takes in Gillingham (5 miles east), Chatham (4 miles east), Rainham (7 miles east), Luton (4 miles east), Park Wood (7 miles east) and Lordswood (5 miles south-east).
Around Cuxton
Recent enquiries here include premises near Baty's Marsh and Strood Academy, among other places. Cuxton has its own railway station: Cuxton station. Well-known places in the area include Rochester Castle (2.3 miles north-east) and French Hospital (2.4 miles east). Green spaces nearby include Ranscombe Farm and Gad's Hill.
Cuxton: questions and answers
Is a smaller place like Cuxton outside your area?
No. Places such as Cuxton are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Is hospital work, at somewhere like French Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do you design or specify fire stopping?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is installing what they specify, to the product’s tested detail.
Do you work in Scotland as well as England?
Our work covers Greater London, the South East and every Scottish council area. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, with proprietary products tested for the end use.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Do you approve fire stopping for building control?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. We work to the specification and the manufacturer’s installation guidance.
How much does the work cost?
There isn’t a price list, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Building owners, agents and FMs in Cuxton
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Cuxton can sit alongside others in a wider programme across Medway.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
How a job runs
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For work around Cuxton, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
Quotes
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Advice
Signs you need fire stopping in Cuxton
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
Common reasons buildings call us in:
- Unsealed openings around new pipes and cables
- Unsealed penetrations discovered above suspended ceilings
- Builders’ foam or ordinary silicone in compartment walls
- Snag lists that include open service penetrations
For a unit at a site such as Strood Retail Park (2.2 miles north-east of Cuxton), any new service through a fire-resisting wall should be sealed to the tested detail.
What to look for in a quote
- Their approach to joint depth and backing
- The terms of the workmanship guarantee
- Whether primer will be used where the manufacturer specifies it
- How they’ll work around occupants
What sealant work can’t fix
Some faults sit outside our scope, and we say so rather than covering them up:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire risk assessments, a job for a competent assessor
- Signing off or certifying a building’s fire stopping
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think before you book.
Joints and surfaces we work on
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
How the quote is worked out
We price every job individually. The main factors are:
- The total length or number of joints
- Any access equipment needed
- Site requirements such as inductions and permits
- Distance, for remote addresses
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
- Where the site is, with the postcode
- Approximate linear metres or a joint schedule
For a fixed quote, phone 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. You can also send details through our quote form.