Fire Stopping in Curteis' Corner
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Curteis' Corner and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Old intumescent sealant that has split away
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
Need fire stopping in Curteis' Corner?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Curteis' Corner
Facilities managers in Curteis' Corner often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. Where there isn’t one, the designer or fire engineer needs to set one first. We work on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations, and the usual reasons a site gets in touch are damaged fire seals in risers and voids and builders’ foam or ordinary silicone in compartment walls. Facilities teams, main contractors and managing agents in Curteis' Corner tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Curteis' Corner, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
A 12-month guarantee applies to all our work in Kent. If an installation problem shows up, call 01277 525 020 or email a schedule or drawings and we’ll arrange a return visit.
- Place
- Curteis' Corner (TN27)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Do you need fire stopping in Curteis' Corner?
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
It’s worth sending us details if you spot any of the following:
- Fire sealant pulled out of the opening
- Openings left by services added after handover
- Non-fire-rated filler around services
- Hidden openings found during inspections
At a healthcare site like Benenden Hospital (3 miles south-west of Curteis' Corner), new services through compartment walls are a constant, and each needs the specified seal.
Before you book anyone
- How they’ll work around occupants
- Whether primer will be used where the manufacturer specifies it
- How joint depth will be controlled
- Health and safety accreditation such as CHAS
Cost factors for service penetrations
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Whether old sealant has to be cut out first
- Working within restricted access windows
- Location, for remote and island sites
- Any access equipment needed
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Sending details for a quote
Diagnosis starts before we arrive. Let us know:
- Where the site is, with the postcode
- How the joints are reached, and at what height
- Your programme or deadline
- Whether the building will be occupied during the work
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Commercial clients in Curteis' Corner
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
What the job involves on each surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do and we will tell you what the detail says instead.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest so we know it sits within the tested range, and any that don’t are flagged.
On site: what to expect
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs in and around smaller places like Curteis' Corner are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
Ask for a quote
To get a fixed quote, phone 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
Questions about Curteis' Corner
Is a hospital such as Benenden Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Is Curteis' Corner off your patch?
Not at all. Curteis' Corner is within our area. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Can you fire stop behind the services contractors?
Yes. Share the penetration schedule and product details. We can follow the services contractor floor by floor.
What changes on 2 September 2029?
For buildings in England, Approved Document B removes BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence, subject to transitional arrangements. Scotland follows its own Technical Handbook.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so it’s worth checking what your contract says. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Compartments and services around Curteis' Corner
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Curteis' Corner lies roughly 41 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Halls and meeting rooms at places like Parish Church of All Saints sometimes gain new services, and any compartment wall crossed needs the specified seal. For a school such as John Mayne Church of England Primary School, penetration sealing fits best at the end of the summer works.
Curteis' Corner is about 10 miles west of Ashford, in Kent. Across the TN27 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Kent, 931 places are covered, Curteis' Corner among them. Sites around Brighton have their own page, about 39 miles away.
If you need fire stopping in TN27, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Headcorn Road, Smarden Road and Cot Lane or close by, send details and we’ll quote for service penetrations. Close to Curteis' Corner, our area also takes in Standen (1 mile north-east), Biddenden (1 mile south-west), Lashenden (1 mile north), Stede Quarter (1 mile south-east) and Hareplain (1 mile west). A short drive away, we cover Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).
Around Curteis' Corner
Recent enquiries here include premises near The Red Lion Inn and the streets around them. The closest station to Curteis' Corner is Headcorn station, about 2.9 miles north of the centre. A little further out are Sissinghurst Castle (3 miles west) and Benenden Hospital (3 miles south-west).