Curteis' Corner coloured sealant
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Curteis' Corner. Send details for a fixed quote.
- Old sealant that has yellowed, darkened or faded
- Fit-outs with a sealant colour in the specification
- Untidy coloured beads with ragged edges
Coloured sealant across Curteis' Corner
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant in Curteis' Corner
Coloured sealant work ranges from a new shop fit to replacing failed joints on an existing building. On resealing, matching the existing colour is often as important as the seal itself. We work on powder-coated and anodised frames, shop-fit joinery and counters and hotel bathrooms and public areas, and the usual reasons a site gets in touch are standard-colour sealant spoiling a high-end finish and colour changes after a rebrand or refit. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Curteis' Corner is the same: the right product in a properly prepared joint.
Work in smaller places such as Curteis' Corner tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Curteis' Corner (TN27)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Curteis' Corner
To price the job, we consider:
- Joint width, depth and condition
- Any access equipment needed
- Location, for remote and island sites
- Quantities, in metres or numbers
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- The asbestos register, for older buildings
- The postcode of the building
- Specification clauses that apply
- Photos of the joints, close up and from further back
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Building owners, agents and FMs in Curteis' Corner
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Places near Curteis' Corner
What else we do in Curteis' Corner
Sealant on show in Curteis' Corner’s commercial buildings
Curteis' Corner is about 41 miles from central London. This part of the South East is dense with business parks and out-of-town offices. If you have premises across the region, one contractor can cover them all. Curteis' Corner is in the South East, one of the UK’s drier regions. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
For any commercial premises in Curteis' Corner, a lasting joint depends on full removal of the old sealant and clean, dry faces. Offices and shops close to stations such as Headcorn station, 2.9 miles to the north of Curteis' Corner, tend to be busy all day, so sealant work is planned around opening hours.
Curteis' Corner is about 10 miles west of Ashford, in Kent. Any commercial site in Curteis' Corner is covered, for single jobs and planned programmes alike. Curteis' Corner is one of 931 places we cover in Kent for colour-matched joints. For work in that direction, see our Brighton page.
Business premises anywhere in TN27 are within our area for colour-matched joints. We cover commercial and managed buildings on Headcorn Road, Smarden Road and Cot Lane. Nearby places we also cover include Standen (1 mile north-east), Biddenden (1 mile south-west), Lashenden (1 mile north), Stede Quarter (1 mile south-east) and Hareplain (1 mile west). Further afield, our area takes in Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).
Near you in Curteis' Corner
Locally, jobs take us to sites close to The Red Lion Inn, among other places. Curteis' Corner’s nearest station is Headcorn station, about 2.9 miles north. Nearby you will also find Sissinghurst Castle (3 miles west) and Benenden Hospital (3 miles south-west).
Surface by surface
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. The nearest colour in the range is agreed with you.
Hotel interiors
Phased resealing lets rooms go back into use quickly. We plan around your occupancy so rooms return to service in stages.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before the next one starts. For work around Curteis' Corner, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
Getting the site ready
- Let building users know which areas are affected
- Tell us which areas need to stay in use
- Tell us what induction or permit system the site runs
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or email drawings and photos to discuss it first.
Read more
Curteis' Corner: questions and answers
Can the sealant on our Curteis' Corner premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we will confirm what’s available for the product.
Is Curteis' Corner off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
When something else is needed
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Finishes that change colour from one area to another
- Preventing all fading from sunlight and weathering
- A guaranteed perfect match to every finish
If you’re not sure, just speak to us on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Surfaces we seal
- Powder-coated and anodised frames
- Natural stone and brick
- Cladding panels
- Office fit-out finishes
- Shop-fit joinery and counters
- Hotel bathrooms and public areas