Crossapol fire stopping
Work needed on a service penetration in Crossapol? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
- Old intumescent sealant that has split away
Need fire stopping in Crossapol?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Do you need fire stopping in Crossapol?
Openings in fire-resisting walls typically appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Look out for the following:
- Fire sealant pulled out of the opening
- Open linear gaps along the top of fire-resisting walls
- Openings left by services added after handover
- Penetration schedules that need working through
Buildings near Crossapol get the fire-rated product that’s specified, installed to its tested detail.
Comparing quotes
- How the joint faces will be prepared and primed
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How the existing material will be dealt with
- Which product they’ll use, and why it suits the joint
How we handle fire stopping in Crossapol
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Site teams most often ask us about snag lists that include open service penetrations and unsealed penetrations discovered above suspended ceilings, across small duct penetrations where the tested detail allows, linear gaps at wall heads and cable penetrations. Searching for sealant specialists in Crossapol? We have been sealing commercial buildings since 2005.
Hotels and care homes around smaller places like Crossapol often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Crossapol (PA77)
- Wider area
- Argyll and Bute
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Crossapol
Other services in Crossapol
Fire stopping in Crossapol: the local picture
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
For any site around Crossapol, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
Crossapol is in Argyll and Bute. If you’re looking for fire stopping in Crossapol, we can help. We work across 124 places in Argyll and Bute.
If you need fire stopping in PA77, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Sruthan Terrace and Reef Terrace or close by, send details and we’ll quote for service penetrations. You’ll find Crossapol on or near the B8065, so getting applicators and materials to site is simple. Nearby places we also cover include Balemartine (2 miles south-west), Balephuil (3 miles south-west), Scarinish (3 miles east), Arinagour (16 miles north-east) and Baile Mòr (21 miles south-east). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
What’s near Crossapol
A little further out are An Iodhlann (2.7 miles east). Green spaces nearby include Loch an Eilein and Beinn Ghott.
Our process
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Tell us who will meet us and how to get in at your building near Crossapol. That goes into the plan alongside the quote.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Flag any permit to work we’ll need
- Share the asbestos register for older buildings
- Point out any areas we must not close
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
How the job changes by surface
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range, and any that don’t are flagged.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Foam or ordinary sealant is never a fire-seal repair
- Keep product data and details in the fire safety file
- Include service cupboards in routine inspections
- Flag new cables with no seal around them
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.
When to bring in a specialist
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Questions we’re asked in Crossapol
Is Crossapol too far out for you?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Do you decide the fire-stopping details for buildings in Crossapol?
No, that sits with the designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Leave it or put it right?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. Renewing every failing joint on one visit is the sensible approach for a place like Crossapol. Photos of each area help us quote the whole job.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why appoint us
- Sealing commercial buildings since 2005
- 12-month guarantee on workmanship
- Constructionline member for supplier checks
- Clear, fixed quotes
Read how commercial sealant jobs are priced or how we’re accredited.