Fire Stopping in Crimond
Planning work on a service penetration in Crimond? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Seals disturbed by maintenance and left open
- Seals that don’t match their tested detail
- Service penetrations left open after M&E works
Need fire stopping in Crimond?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Why act early in Crimond
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these. Renewing every failing joint on one visit is the sensible approach for a place like Crimond. Send photographs and we’ll quote for everything together.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
What you get with us
- Products installed to the manufacturer’s instructions
- Constructionline member
- Fully insured, including public liability cover
- One number for every site we cover
Take a look at our cost guide and how we’re accredited.
About our fire stopping in Crimond
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance. Site teams most often ask us about unsealed joints where partitions meet the slab and fire seals cut back for extra cables and never reinstated, across small duct penetrations where the tested detail allows, pipe penetrations and service gaps in risers. Facilities teams, main contractors and managing agents in Crimond tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Hotels and care homes around smaller places like Crimond often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Crimond (AB43)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What affects the price in Crimond
Each job is priced on its own details. The things that drive the figure:
- How much existing material needs removing
- Backing rod, priming and other preparation
- Induction, permit and paperwork requirements
- How accessible the joints are
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we will explain how it’s made up.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Access details, including height
- The postcode of the building
- The product your specification calls for
- A wide shot and a close-up of the area
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or email drawings and photos.
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. Travel to smaller Scottish places like Crimond is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Share your working hours and any access restrictions
- Let us know about inductions and permits
- Confirm the product named in the specification
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call 01277 525 020 or email drawings and photos with what you know.
Advice
Fire stopping around Crimond: what changes locally
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
Halls and meeting rooms at places like Crimond Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Crimond is about 7 miles south-east of Fraserburgh, in Aberdeenshire. We cover Crimond, with the same fixed quotes and 12-month guarantee as everywhere else. Crimond is one of 179 places in Aberdeenshire on our list for service penetrations. Aberdeen is covered too, some 32 miles away.
Business premises anywhere in AB43 are within our area for service penetrations. Among the streets we cover are Logie Avenue East, Logie Road and The Row. Just outside Crimond, we also work in Keyhead (1 mile south-east), New Leeds (4 miles west), Kirktown (4 miles south-east), Rora (4 miles south) and St Fergus (4 miles south-east). A short drive away, we cover Peterhead (8 miles south-east), Fraserburgh (7 miles north-west), Roanheads (8 miles south-east), Clerkhill (8 miles south-east), Port Henry (8 miles south-east) and Mintlaw (6 miles south-west).
What’s near Crimond
Nearby you’ll also find Castle of Rattray (2.3 miles east). For a walk, there’s Loch of Strathbeg.
Also in Crimond
What we can’t put right
Honesty saves time and money. New sealant won’t cure:
- Signing off or certifying a building’s fire stopping
- Walls or floors that aren’t fire-resisting to begin with
- Fire doors, dampers or other fire safety equipment
If you’re not sure, just give us a call on 01277 525 020 or email the details over and we’ll give you a straight answer.
Surfaces we seal
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
Questions we’re asked in Crimond
How do the Scottish rules apply to fire-rated sealing in Crimond?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Crimond off your patch?
No. Small places get the same service as large ones. We cover the whole of Scotland. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Do you need fire stopping in Crimond?
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe, and the repair is often skipped.
Any of the following is a good reason to get the joints checked over:
- Old intumescent sealant that has split away
- Seals that don’t match their tested detail
- Seals disturbed by maintenance and left open
- Openings found when ceilings come down for a refit
Buildings near Crimond get the fire-rated product that’s specified, installed to its tested detail.
What your quote should include
- Their public liability cover
- Will CSCS-carded applicators be on site?
- The named product and why it was chosen
- Is depth set with backing rod, or bond-breaker tape in shallow joints?