Fire stopping in Roanheads
Sealant work in Roanheads for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Openings left by services added after handover
- Penetration schedules that need working through
- Seals disturbed by maintenance and left open
Fire stopping in Roanheads
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Roanheads
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. Most enquiries involve fire seals cut back for extra cables and never reinstated and unsealed joints where partitions meet the slab, on small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations. Facilities teams, main contractors and managing agents in Roanheads tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Refurbishments in small hotels, schools and care homes around places like Roanheads can leave gaps around new services. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Roanheads (AB42)
- Region
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
- Fire risk assessments, a job for a competent assessor
If you are not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
What we seal
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
What the job involves on each surface
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, with the work itself normally taking a single visit for a short list of penetrations, or a phased programme for a whole building. Travel to smaller Scottish places like Roanheads is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- For older buildings, check the asbestos register before work
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or send photos by email.
Read more
When to call us in Roanheads
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Most enquiries start with something like this:
- Unsealed penetrations discovered above suspended ceilings
- Open linear gaps along the top of fire-resisting walls
- Penetration schedules that need working through
- Expanding foam used as fire stopping
On a hospital site such as Ugie Hospital, 0.8 miles north-west of Roanheads, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Comparing quotes
- Can the work be phased to keep areas open?
- The terms of the workmanship guarantee
- What site paperwork they can supply
- What level of public liability insurance do they hold?
Compartments and services around Roanheads
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. There are a number of hotels within about 2 miles of Roanheads. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product.
Hotels like Albert Hotel, under half a mile to the west of Roanheads, are refurbished in phases, and each phase can open up compartment walls. Industrial units on estates such as Blackhouse Industrial Estate, 1.3 miles west of Roanheads, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Roanheads is about 1 mile east of Peterhead, in Aberdeenshire. We cover Roanheads and the rest of Aberdeenshire, with the same fixed quotes and 12-month guarantee as everywhere else. 179 places across Aberdeenshire fall within our area, including Roanheads. Aberdeen is covered too, some 28 miles away.
Work on service penetrations is covered throughout AB42, whatever the building. Buildings on Pool Lane, Love Lane and Park Lane are within our area. Just outside Roanheads, we also work in Port Henry (1 mile south-east), Peterhead (1 mile west), Clerkhill (1 mile south-west), Buchanhaven (1 mile north-west) and Inverugie (2 miles west). Further afield, our area takes in Fraserburgh (15 miles north-west), Ellon (15 miles south-west), Mintlaw (9 miles west), Cruden Bay (7 miles south-west), Inverallochy (13 miles north-west) and Longside (6 miles west).
Landmarks near Roanheads
Around Roanheads, our work takes us to commercial buildings near The Cross Keys pub, among other places. A little further out are Ugie Hospital (0.8 miles north-west) and Keith Inch Castle (0.6 miles south). For a walk, there’s Meet Hill.
Also near Roanheads
Other services in Roanheads
Your questions answered
Is a hospital such as Ugie Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you cover business parks and estates near Roanheads, such as Blackhouse Industrial Estate?
Yes. Estates, retail parks and business parks around Roanheads, Blackhouse Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Does the weather affect the work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What do you charge?
Every job gets its own fixed quote. For yours, ring 01277 525 020 or email the details over.
Do the same rules apply to fire stopping in Scotland?
Our area runs from Greater London and the South East to every part of Scotland. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance.
What happens if it’s left?
The longer openings stay, the more there tend to be: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small and avoids a much larger catch-up later. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Roanheads, a repair visit takes planning, so it’s better to act early.
A quote for service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Why choose Mastic Doctor in Roanheads
- Fully insured
- Fixed quotes based on photographs, drawings or a visit
- Work carried out by CSCS-carded applicators
- Health and safety: CHAS accredited
Read our cost guide and our accreditations.