Cole Henley fire stopping
Looking for fire stopping in Cole Henley? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Hidden openings found during inspections
- Fire seals cut back for extra cables and never reinstated
- Snag lists that include open service penetrations
Fire stopping near Cole Henley
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Honest limits
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Approving the work on behalf of building control
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, phone 01277 525 020 or email the details over and we will say what we think before you book.
Joints and surfaces we work on
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
Fire stopping for commercial buildings in Cole Henley
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. We work on linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors, and the usual reasons a site gets in touch are open linear gaps along the top of fire-resisting walls and hidden openings found during inspections. Searching for sealant specialists in Cole Henley? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Barn and farm-building conversions near places like Cole Henley often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Cole Henley (RG28)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Service penetrations in Cole Henley buildings
At about 56 miles from central London, Cole Henley is within reach of the capital. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
For a unit at a site such as Ardglen Industrial Estate, 1.7 miles south of Cole Henley, new power or data runs between office and warehouse can breach a compartment wall.
Cole Henley is about 7 miles north-east of Andover, in Hampshire. Any commercial site in Cole Henley is covered, for single jobs and planned programmes alike. We work across 723 places in Hampshire, large and small. Sites around Reading have their own page, about 20 miles away.
Anyone looking for fire stopping in RG28 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Sites close to Cole Henley are covered too, including Wells-in-the-Field (2 miles south), Freefolk (2 miles south-east), Whitchurch (2 miles south), Wadwick (3 miles north-west) and St Mary Bourne (3 miles west). Nearby towns on our patch include Basingstoke (10 miles east), Winchester (14 miles south), Andover (7 miles south-west), Tadley (10 miles north-east), Hyde (13 miles south) and Popley (11 miles east).
Landmarks near Cole Henley
For rail, the closest station is Whitchurch (Hampshire) station, roughly 1.4 miles south of the centre. Green spaces nearby include Ladle Hill.
Why deal with it now?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Older rural buildings around Cole Henley move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
The price depends on how many linear metres there are, what has to come out first and the access. Call for a quote once you have the details.
What you get with us
- One contact handling all your sites
- Work carried out by CSCS-carded applicators
- 12 months’ guarantee on every job
- CHAS accredited contractor
Read what affects the cost and how we’re accredited.
Towns and villages near Cole Henley
Other services in Cole Henley
Owners, agents and contractors
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Cole Henley: questions and answers
Is Cole Henley off your patch?
Not at all. Cole Henley is within our area. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How does the move away from BS 476 affect penetration seals in Cole Henley?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
What do you charge?
There isn’t a price list, as every site differs. With photographs or drawings, we can give you a fixed quote.
Our process
At the end of each section, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Cole Henley, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Explain the parking and delivery arrangements
- Send your site hours and access windows
- Let us know about inductions and permits
Quotes
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or use the quote form to discuss it first.
Advice
What we’re called out for in Cole Henley
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls.
If one of these sounds familiar, it’s time for a closer look:
- Non-fire-rated filler around services
- Fire stopping installed outside its tested range
- Damaged fire seals in risers and voids
- Snag lists that include open service penetrations
Holiday works at schools like Testbourne Community School often leave service openings to seal before pupils return.
What to look for in a quote
- What level of public liability insurance do they hold?
- Whether old or failed sealant will be cut out, not overlaid
- Their approach to joint depth and backing
- Can the work be phased to keep areas open?
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.