The Mastic Doctor team standing beside their branded vans outside an office building
Highland · Scotland

Fire stopping in Coillore

Commercial sealant work in Coillore for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.

  • Penetration schedules that need working through
  • Unsealed joints where partitions meet the slab
  • Fire-rated sealant that has cracked or shrunk back
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Signed off, with 12 months’ guarantee.
Covering the South East & Scotland
Constructionline member
£5m public liability

Fire stopping across Coillore

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Your questions answered

What do Scotland’s building standards say about service penetrations in Coillore?

The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.

Is Coillore too far out for you?

No. Places such as Coillore are covered as much as the big towns. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.

Can staff carry on working while you are here?

Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.

Does weather matter for sealant work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Do you need to see the site first?

It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs normally get a visit.

How do we ask for a quote?

It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.

How long does a typical visit take?

The duration is planned around your programme and the access we are given. We’ll give you an estimate of time on site when we quote.

About our fire stopping in Coillore

We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. Most enquiries involve builders’ foam or ordinary silicone in compartment walls and head-of-wall gaps with no fire seal, on joints between fire-resisting walls and floors, service gaps in risers and linear gaps at wall heads. Most enquiries from Coillore start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.

Around smaller places such as Coillore, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.

Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.

Where
Coillore (IV56)
Region
Highland
Guarantee
12 months on our workmanship
Price
A fixed quote before we start
Phone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Should maintenance staff do it?

Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Our process

Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Where we can, we combine work around Coillore with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.

  1. We ask for the product and detail your designer has specified.
  2. Openings are measured and grouped by detail.
  3. Old or wrong materials are cut out.
  4. Where the detail needs backing, it goes in at the stated depth.
  5. We gun the sealant in to the specified depth around each service and tool it.
  6. We walk the completed areas with you and confirm the records agreed at quote stage.

What we need from you

  • Arrange parking or a loading space
  • Make sure the joints can be reached
  • Warn occupants and staff about the work

Get a fixed quote

To get a fixed quote, call the office on 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.

Get a price

Advice

Compartments and services around Coillore

Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.

For any site around Coillore, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.

Coillore is in Highland. Any commercial site in Coillore is covered, for single jobs and planned programmes alike. Our Highland coverage takes in 256 places, from busy centres to rural villages.

Work on service penetrations is covered throughout IV56, for business premises of every kind. Nearby places we also cover include Carbost (4 miles south-east), Lonmore (8 miles north-west), An t-Aodann Ban (8 miles north), Dunvegan (9 miles north-west) and Portree (9 miles north-east) for service penetrations. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you give us a call on 01277 525 020 or send details through our quote form.

Landmarks near Coillore

The countryside around Coillore includes Loch Duagrich.

Map of Coillore © OpenStreetMap contributors

How the quote is worked out

Before we quote, we look at:

  • The product specified
  • How accessible the joints are
  • Joint width, depth and condition
  • The total length or number of joints

Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.

Before you send an enquiry

The more we know, the firmer the quote. Helpful details to send:

  • What the building is and how it’s used
  • Rough lengths or quantities, or drawings if you have them
  • Where the site is, with the postcode
  • Photos of the joints, close up and from further back

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or send photos by email.

Common problems we fix in Coillore

Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access normally bring them to light.

What tends to prompt an enquiry:

  • Openings left by services added after handover
  • Penetration schedules that need working through
  • Fire sealant pulled out of the opening
  • Seals that don’t match their tested detail

For buildings in and around Coillore, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.

What to look for in a quote

  • Proof of insurance
  • Will CSCS-carded applicators be on site?
  • Can the work be phased to keep areas open?
  • Is the sealant right for the movement and the substrate?

Questions to ask before you appoint anyone

Aftercare for building managers

For the best life from the joints:

  • Settle who seals which penetrations at the start of a project
  • Have penetrations checked while they can still be seen
  • Look above ceilings when tiles are lifted for other jobs
  • Ask which product is in place before decorating

After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail.

Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned.

Building owners, agents and FMs in Coillore

We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Coillore can sit alongside others in a wider programme across Highland.

Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.

Accreditations

Trusted. Accredited. Insured.